Artículos relacionados a Numerical Modelling and Experimental Testing of Heat...

Numerical Modelling and Experimental Testing of Heat Exchangers: 161 (Studies in Systems, Decision and Control, 161) - Tapa blanda

Libro 151 de 378: Studies in Systems, Decision and Control

Taler, Dawid

 
9783030081836: Numerical Modelling and Experimental Testing of Heat Exchangers: 161 (Studies in Systems, Decision and Control, 161)
Tapa blanda
ISBN 10: 3030081834 ISBN 13: 9783030081836
Editorial: Springer, 2018

Sinopsis

This book presents new methods of numerical modelling of tube heat exchangers, which can be used to perform design and operation calculations of exchangers characterized by a complex flow system. It also proposes new heat transfer correlations for laminar, transition and turbulent flows. A large part of the book is devoted to experimental testing of heat exchangers, and methods for assessing the indirect measurement uncertainty are presented. Further, it describes a new method for parallel determination of the Nusselt number correlations on both sides of the tube walls based on the nonlinear least squares method and presents the application of computational fluid dynamic (CFD) modeling to determine the air-side Nusselt number correlations. Lastly, it develops a control system based on the mathematical model of the car radiator and compares this with the digital proportional-integral-derivative (PID) controller. The book is intended for students, academics and researchers, as well as for designers and manufacturers of heat exchangers.

"Sinopsis" puede pertenecer a otra edición de este libro.

Acerca del autor

Professor Dawid Taler, D.Sc., Ph.D. received his doctoral degree in 2002, and postdoctoral degree in 2009 from the Faculty of Mechanical Engineering and Robotics of the University of Science and Technology (AGH) in Cracow. Since 2011 he has been working as a professor at the Faculty of Environmental Engineering at the Cracow University of Technology. Currently, he manages the Department of Thermal Processes, Air Protection and Waste Utilization at the Cracow University of Technology. In 2016 he received the title of professor. He specializes in heat transfer and heating systems, including experimental methods in heat and fluid science. A particular research and development interest is the mathematical modelling and experimental investigation of heat exchangers and energy machines and devices. He is an author of 3 and co-author of 5 monographs and scientific books, 3 of which have been published in English. He has also published 30 chapters in international and national books. He is the author or co-author of over 290 articles in the field of heat transfer, numerical modelling of heat and flow processes, and energy and power technologies. Professor Taler also specializes in thermal and flow measurements, including heat flux measurements, determination of heat transfer coefficient and inverse heat transfer problems, especially the dynamics of heat exchangers and steam generators.

De la contraportada

This book presents new methods of numerical modelling of tube heat exchangers, which can be used to perform design and operation calculations of exchangers characterized by a complex flow system. It also proposes new heat transfer correlations for laminar, transition and turbulent flows. A large part of the book is devoted to experimental testing of heat exchangers, and methods for assessing the indirect measurement uncertainty are presented. Further, it describes a new method for parallel determination of the Nusselt number correlations on both sides of the tube walls based on the nonlinear least squares method and presents the application of computational fluid dynamic (CFD) modeling to determine the air-side Nusselt number correlations. Lastly, it develops a control system based on the mathematical model of the car radiator and compares this with the digital proportional-integral-derivative (PID) controller. The book is intended for students, academics and researchers, as well as for designers and manufacturers of heat exchangers.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
Springer
Año de publicación
2018
Idioma
Inglés
ISBN 10 
3030081834
ISBN 13 
9783030081836
Encuadernación
Tapa blanda
Número de páginas
608
Contacto del fabricante
ProductSafety@springernature.com
ProductSafety@springernature.com

Poststr. 9
Darmstadt
64293
Alemania