2010-03-09 Energy Conservation Program for Certain Commercial and Industrial Equipment - Test Procedures for Metal Halide Lamp Ballasts (US Energy ... Office Regulation) (EERE) (2018 Edition) - Tapa blanda

2010-03-09 Energy Conservation Program for Certain Commercial and Industrial Equipment - Test Procedures for Metal Halide Lamp Ballasts (US Energy Efficiency and Renewable Energy Office Regulation) (EERE) (2018 Edition) (Paperback)

Paperback. Condición: new. Paperback. 2010-03-09 Energy Conservation Program for Certain Commercial and Industrial Equipment - Test Procedures for Metal Halide Lamp Ballasts (US Energy Efficiency and Renewable Energy Office Regulation) (EERE) (2018 Edition) The Law Library presents the complete text of the 2010-03-09 Energy Conservation Program for Certain Commercial and Industrial Equipment - Test Procedures for Metal Halide Lamp Ballasts (US Energy Efficiency and Renewable Energy Office Regulation) (EERE) (2018 Edition). Updated as of May 29, 2018 The U.S. Department of Energy (DOE) is establishing metal halide lamp ballast test procedures in today's final rule by which manufacturers will demonstrate compliance with the metal halide lamp fixture energy conservation standards mandated by the Energy Policy and Conservation Act (EPCA), as amended. These test procedures are based primarily on and incorporate by reference provisions of American National Standards Institute (ANSI) Standard C82.6-2005, "Ballasts for High-Intensity Discharge Lamps-Methods of Measurement." As further required by EPCA, DOE is establishing a test method for measuring standby mode power consumption and explaining why off mode power consumption does not apply to metal halide lamp ballasts. The test procedures' standby mode provisions are based on the International Electrotechnical Commission (IEC) Standard 62301, "Household electrical appliances-Measurement of standby power." This rule also adopts a number of definitions for key terms. This book contains: - The complete text of the 2010-03-09 Energy Conservation Program for Certain Commercial and Industrial Equipment - Test Procedures for Metal Halide Lamp Ballasts (US Energy Efficiency and Renewable Energy Office Regulation) (EERE) (2018 Edition) - A table of contents with the page number of each section Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability. Nº de ref. del artículo: 9781723202605

Contactar al vendedor