Triangulation - Applied to Sheet Metal Pattern Cutting - A Comprehensive Treatise for Cutters, Draftsmen, Foremen and Students: Progressing from the ... in the Development of Sheet Metal Pat - Tapa blanda

Kidder, F. S.

 
9781473328945: Triangulation - Applied to Sheet Metal Pattern Cutting - A Comprehensive Treatise for Cutters, Draftsmen, Foremen and Students: Progressing from the ... in the Development of Sheet Metal Pat
Tapa blanda
ISBN 10: 1473328942 ISBN 13: 9781473328945
Editorial: Owen Press, 2016

Sinopsis

This vintage book contains a detailed guide to triangulation as applied to sheet metal pattern cutting, originally designed for the use of cutters, draughtsmen, foremen, and students. With detailed diagrams and a wealth of useful information, this volume will be of considerable utility those with an interest in sheet metal work. Contents include: "Elementary Principles", "A Simple Transitional Fitting", "The Oblique Cone", "A Transitional Fitting From Rectangular to Round Which Makes an Offset", "A Twisted Transitional Fitting", "The Pattern for the Frustum of an Oblique Cone", "A Transitional Fitting From Oblong to Round", et cetera. Many vintage books such as this are increasingly scarce and expensive. We are republishing this volume now in an affordable, modern edition complete with a specially commissioned new introduction on metal work. First published in 1917.

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor

This vintage book contains a detailed guide to triangulation as applied to sheet metal pattern cutting, originally designed for the use of cutters, draughtsmen, foremen, and students. With detailed diagrams and a wealth of useful information, this volume will be of considerable utility those with an interest in sheet metal work. Contents include: "Elementary Principles", "A Simple Transitional Fitting", "The Oblique Cone", "A Transitional Fitting From Rectangular to Round Which Makes an Offset", "A Twisted Transitional Fitting", "The Pattern for the Frustum of an Oblique Cone", "A Transitional Fitting From Oblong to Round", et cetera. Many vintage books such as this are increasingly scarce and expensive. We are republishing this volume now in an affordable, modern edition complete with a specially commissioned new introduction on metal work. First published in 1917.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
Owen Press
Año de publicación
2016
Idioma
Inglés
ISBN 10 
1473328942
ISBN 13 
9781473328945
Encuadernación
Tapa blanda
Número de páginas
280
Contacto del fabricante
no disponible
Persona responsable
no disponible

Otras ediciones populares con el mismo título

9789333382427: Triangulation applied to sheet metal pattern cutting A comprehensive treatise for cutters draftsmen foremen and students progressing from the simplest phases of the subject to the most complex problems employed in the development of sheet metal patter 1917 [Hardcover]

Edición Destacada

ISBN 10:  9333382429 ISBN 13:  9789333382427
Tapa dura