Automatic Screw Machine Practice, Vol. 3: Circular Form and Cut-Off Tools for the Brown and Sharpe Automatic Screw Machine (Classic Reprint) - Tapa blanda
Sinopsis
Excerpt from Automatic Screw Machine Practice, Vol. 3: Circular Form and Cut-Off Tools for the Brown and Sharpe Automatic Screw Machine
It is obvious that, as the condi-tiofis'flfidér 3which the work is done and the limits allowed on it vafy be impracticable to lay down hard and fast rules in: mate; the application of circular tools, but the following suggestions will be found applicable to general conditions. At D, Fig. 3, is shown a method sometimes used to advan tage in making shouldered screws or other pieces of a similar char acter. This forming operation is not recommended when the piece to be made is required to be very accurate, as a slight eccentricity in the spring collet would cause the part f to be out of true with the part a. In cases where accuracy is required. The part a could be roughed down with the cut-off tool and a light finishing cut taken with a box-tool. At D, is shown an improved method of forming the same piece, as the form tool here removes the burr from the head.
About the Publisher
Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com
This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
Excerpt from Automatic Screw Machine Practice, Vol. 3: Circular Form and Cut-Off Tools for the Brown and Sharpe Automatic Screw Machine
It is obvious that, as the condi-tiofis'flfidér 3which the work is done and the limits allowed on it vafy be impracticable to lay down hard and fast rules in: mate; the application of circular tools, but the following suggestions will be found applicable to general conditions. At D, Fig. 3, is shown a method sometimes used to advan tage in making shouldered screws or other pieces of a similar char acter. This forming operation is not recommended when the piece to be made is required to be very accurate, as a slight eccentricity in the spring collet would cause the part f to be out of true with the part a. In cases where accuracy is required. The part a could be roughed down with the cut-off tool and a light finishing cut taken with a box-tool. At D, is shown an improved method of forming the same piece, as the form tool here removes the burr from the head.
About the Publisher
Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com
This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Reseña del editor
Excerpt from Automatic Screw Machine Practice, Vol. 3: Circular Form and Cut-Off Tools for the Brown and Sharpe Automatic Screw Machine
When any given piece or work is to be made on the screw machine, the methods of arranging the operations and the tools to be used should be decided upon before designing the cams. One of the first things to consider is the method of applying the circular form and cut oif tools. The methods, or course, will vary to a considerable extent, according to the shape of the piece to be made.
About the Publisher
Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com
This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
"Sobre este título" puede pertenecer a otra edición de este libro.
Otras ediciones populares con el mismo título
Resultados de la búsqueda para Automatic Screw Machine Practice, Vol. 3: Circular...
Imagen del vendedor
Automatic Screw Machine Practice, Vol. 3 (Classic Reprint)
Impresión bajo demandaLibrería: Forgotten Books, London, Reino Unido
Calificación del vendedor: 4 de 5 estrellas
Paperback. Condición: New. Print on Demand. This book is an in-depth guide to the theory and practice of cutting tools for Brown & Sharpe automatic screw machines. It begins with an examination of box -tools, including designing, tool construction, feeds, and speeds. Following on from this, the author examines hollow mills and their application in screw machining. Furthermore, this book has detailed explanations of angular and shaving cutting tools, which are essential tools for creating intricate profiles and producing a smooth finish in the production of complex parts. The book is written by an experienced engineer, which gives the writing a real-world, practical edge. It is suitable for advanced apprentices, students, and established machinists seeking to build upon their foundational knowledge of screw machine tooling. This book is a reproduction of an important historical work, digitally reconstructed using state-of-the-art technology to preserve the original format. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in the book. print-on-demand item. Nº de ref. del artículo: 9781334197499_0
Comprar nuevo
EUR 21,96
Gastos de envío gratis
Se envía de Reino Unido a Estados Unidos de America
Se envía de Reino Unido a Estados Unidos de America
Cantidad disponible: Más de 20 disponibles
Imagen de archivo
Automatic Screw Machine Practice, Vol 3 Circular Form and CutOff Tools for the Brown and Sharpe Automatic Screw Machine Classic Reprint
Librería: PBShop.store US, Wood Dale, IL, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000. Nº de ref. del artículo: LW-9781334197499
Comprar nuevo
EUR 32,10
Gastos de envío gratis
Se envía dentro de Estados Unidos de America
Se envía dentro de Estados Unidos de America
Cantidad disponible: 15 disponibles
Imagen de archivo
Automatic Screw Machine Practice, Vol 3 Circular Form and CutOff Tools for the Brown and Sharpe Automatic Screw Machine Classic Reprint
Librería: PBShop.store UK, Fairford, GLOS, Reino Unido
Calificación del vendedor: 4 de 5 estrellas
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000. Nº de ref. del artículo: LW-9781334197499
Comprar nuevo
EUR 28,16
Envío por EUR 5,79
Se envía de Reino Unido a Estados Unidos de America
Se envía de Reino Unido a Estados Unidos de America
Cantidad disponible: 15 disponibles