Excerpt from Compressed Air Magazine, Vol. 14: January to December, 1909, Inclusive
In considering the question of pressures it should be remembered that the pressures named are those that should be obtained at the sand blast, which can be confirmed by attaching a pressure gage to the sand tank, and that if the air has to be led to any distance from the air compressor and receiver, the de livery pipe should be materially increased to allow for friction, otherwise the pressure will fall off and the action of the sand blast will not be up to requirements. With but little foresight and at a very little additional expense, air delivery pipes of ample diameter can be installed up to the sand blast, giving the benefit of the full pressure as well as that of a considerable body of air behind the sand jets.
The article above quoted then speaks of the trouble which may be caused by moisture in the air, If the air pipe is long, it says, con densation may take place within it, which if allowed to enter the sand tank would moisten the sand, and care should be taken to remove this either by trapping or by arranging in the piping a U bend, from the bottom of which any condensed water may be drawn off, and by suitably jacketing the main line.
It is the function of the air receiver to dry the air. If the air in the receiver is at its high est pressure and at its lowest temperature the moisture will be deposited there and no mois ture will make its presence known. With the receiver located near the compressor, as is customary, the air is not cool enough, but with a long pipe to traverse, not jacketed, and a receiver near the work the air should always be dry enough.
About the Publisher
Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com
This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
"Sinopsis" puede pertenecer a otra edición de este libro.
Excerpt from Compressed Air Magazine, Vol. 14: January to December, 1909, Inclusive
In considering the question of pressures it should be remembered that the pressures named are those that should be obtained at the sand blast, which can be confirmed by attaching a pressure gage to the sand tank, and that if the air has to be led to any distance from the air compressor and receiver, the de livery pipe should be materially increased to allow for friction, otherwise the pressure will fall off and the action of the sand blast will not be up to requirements. With but little foresight and at a very little additional expense, air delivery pipes of ample diameter can be installed up to the sand blast, giving the benefit of the full pressure as well as that of a considerable body of air behind the sand jets.
The article above quoted then speaks of the trouble which may be caused by moisture in the air, If the air pipe is long, it says, con densation may take place within it, which if allowed to enter the sand tank would moisten the sand, and care should be taken to remove this either by trapping or by arranging in the piping a U bend, from the bottom of which any condensed water may be drawn off, and by suitably jacketing the main line.
It is the function of the air receiver to dry the air. If the air in the receiver is at its high est pressure and at its lowest temperature the moisture will be deposited there and no mois ture will make its presence known. With the receiver located near the compressor, as is customary, the air is not cool enough, but with a long pipe to traverse, not jacketed, and a receiver near the work the air should always be dry enough.
About the Publisher
Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com
This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
"Sobre este título" puede pertenecer a otra edición de este libro.
Librería: Forgotten Books, London, Reino Unido
Paperback. Condición: New. Print on Demand. This book explores the use of compressed air in various industrial applications, ranging from mining and construction to food processing and manufacturing. It traces the history of compressed air technology, from its early use in diving bells to its modern applications in powering tools and machinery. The author provides a comprehensive overview of the principles of compressed air systems, including compressors, receivers, filters, and regulators. The book also discusses the safety considerations and best practices for working with compressed air, emphasizing the importance of proper training and maintenance. This book is a valuable resource for engineers, technicians, and anyone interested in the practical applications of compressed air technology. This book is a reproduction of an important historical work, digitally reconstructed using state-of-the-art technology to preserve the original format. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in the book. print-on-demand item. Nº de ref. del artículo: 9781334187568_0
Cantidad disponible: Más de 20 disponibles
Librería: PBShop.store US, Wood Dale, IL, Estados Unidos de America
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000. Nº de ref. del artículo: LW-9781334187568
Cantidad disponible: 15 disponibles
Librería: PBShop.store UK, Fairford, GLOS, Reino Unido
PAP. Condición: New. New Book. Shipped from UK. Established seller since 2000. Nº de ref. del artículo: LW-9781334187568
Cantidad disponible: 15 disponibles