Bringing Scanning Probe Microscopy up to Speed: 3 (Microsystems) - Tapa dura

Quate, Calvin F.; Manalis, Scott R.; Minne, Stephen C.

 
9780792384663: Bringing Scanning Probe Microscopy up to Speed: 3 (Microsystems)
Tapa dura
ISBN 10: 0792384660 ISBN 13: 9780792384663
Editorial: Springer, 1999

Sinopsis

Bringing Scanning Probe Microscopy Up to Speed introduces the principles of scanning probe systems with particular emphasis on techniques for increasing speed. The authors include useful information on the characteristics and limitations of current state-of-the-art machines as well as the properties of the systems that will follow in the future. The basic approach is two-fold. First, fast scanning systems for single probes are treated and, second, systems with multiple probes operating in parallel are presented.
The key components of the SPM are the mechanical microcantilever with integrated tip and the systems used to measure its deflection. In essence, the entire apparatus is devoted to moving the tip over a surface with a well-controlled force. The mechanical response of the actuator that governs the force is of the utmost importance since it determines the scanning speed. The mechanical response relates directly to the size of the actuator; smaller is faster. Traditional scanning probe microscopes rely on piezoelectric tubes of centimeter size to move the probe. In future scanning probe systems, the large actuators will be replaced with cantilevers where the actuators are integrated on the beam. These will be combined in arrays of multiple cantilevers with MEMS as the key technology for the fabrication process.

"Sinopsis" puede pertenecer a otra edición de este libro.

Críticas

`The presentation is clear and easy to follow, written by hands-on persons. There is a wealth of technical detail and useful diagrams. ...for persons who are serious fabricators of SPM...it is essential reading.'
The Physicist, 37:2 (2000)

Reseña del editor

Bringing Scanning Probe Microscopy Up to Speed introduces the principles of scanning probe systems with particular emphasis on techniques for increasing speed. The authors include useful information on the characteristics and limitations of current state-of-the-art machines as well as the properties of the systems that will follow in the future. The basic approach is two-fold. First, fast scanning systems for single probes are treated and, second, systems with multiple probes operating in parallel are presented.
The key components of the SPM are the mechanical microcantilever with integrated tip and the systems used to measure its deflection. In essence, the entire apparatus is devoted to moving the tip over a surface with a well-controlled force. The mechanical response of the actuator that governs the force is of the utmost importance since it determines the scanning speed. The mechanical response relates directly to the size of the actuator; smaller is faster. Traditional scanning probe microscopes rely on piezoelectric tubes of centimeter size to move the probe. In future scanning probe systems, the large actuators will be replaced with cantilevers where the actuators are integrated on the beam. These will be combined in arrays of multiple cantilevers with MEMS as the key technology for the fabrication process.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
Springer
Año de publicación
1999
Idioma
Inglés
ISBN 10 
0792384660
ISBN 13 
9780792384663
Encuadernación
Tapa dura
Número de páginas
176
Contacto del fabricante
no disponible
Persona responsable
CMN Printpool Inh. Mathis Neumann
https://www.also.com/ec/cms5/en_6000/6000/index.jsp

Friedrich-Karl-Str. 9
Hamburg
Alemania

Otras ediciones populares con el mismo título

9781461373537: Bringing Scanning Probe Microscopy up to Speed: 3 (Microsystems)

Edición Destacada

ISBN 10:  1461373530 ISBN 13:  9781461373537
Editorial: Springer, 2013
Tapa blanda