Systems for Planning and Control in Manufacturing (IIE Core Textbooks S.) - Tapa blanda

Harrison, D. K.

 
9780750649773: Systems for Planning and Control in Manufacturing (IIE Core Textbooks S.)
Tapa blanda
ISBN 10: 0750649771 ISBN 13: 9780750649773
Editorial: Butterworth-Heinemann, 2002

Sinopsis

The book is divided into two sections: Section 1 - Introduces the subject as a whole and describes the key generic tools and techniques to support the manufacturing organisation. Section 2 - Modern planning and control methods at a detailed level.

"Sinopsis" puede pertenecer a otra edición de este libro.

Acerca de los autores

D. K. Harrison is the Assistant Head of Department for the Department of Engineering at Glasgow Caledonian University, Glasgow, UK.

D. J. Petty is a professor in the Department of Mechanical, Aerospace and Manufacturing Engineering, at the University of Manchester Institute of Science and Technology in Manchester, UK.

De la contraportada

*Each chapter begins with a summary of key points and objectives to aid learning
*Case studies included throughout to illustrate the key elements of the text in a practical context
*Introduces a range of systems and management topics supported by examples and case studies

There are many textbooks for IT professionals. Similarly, there are many operations management texts aimed at managers. There are few however, that bridge the gap between these two areas. This text has the objective of addressing the needs of the manager who has to be able to understand and operate planning and control systems.

The book is divided into two sections:
Section 1 - Introduces the subject as a whole and describes the key generic tools and techniques to support the manufacturing organisation.
Section 2 - Modern planning and control methods at a detailed level.|*Each chapter begins with a summary of key points and objectives to aid learning
*Case studies included throughout to illustrate the key elements of the text in a practical context
*Introduces a range of systems and management topics supported by examples and case studies

There are many textbooks for IT professionals. Similarly, there are many operations management texts aimed at managers. There are few however, that bridge the gap between these two areas. This text has the objective of addressing the needs of the manager who has to be able to understand and operate planning and control systems.

The book is divided into two sections:
Section 1 - Introduces the subject as a whole and describes the key generic tools and techniques to support the manufacturing organisation.
Section 2 - Modern planning and control methods at a detailed level.

"Sobre este título" puede pertenecer a otra edición de este libro.

Editorial
Butterworth-Heinemann
Año de publicación
2002
Idioma
Inglés
ISBN 10 
0750649771
ISBN 13 
9780750649773
Encuadernación
Tapa blanda
Número de páginas
312
Contacto del fabricante
no disponible
Persona responsable
no disponible