An Introduction to Fluid Mechanics and Heat Transfer, Third Edition: With Applications in Chemical and Mechanical Process Engineering - Tapa blanda

Kay, J. M.

9780521098809: An Introduction to Fluid Mechanics and Heat Transfer, Third Edition: With Applications in Chemical and Mechanical Process Engineering

Tapa blanda

ISBN 10: 0521098807 ISBN 13: 9780521098809

Editorial: Cambridge University Press, 1975

Ver todas las copias de esta edici�n del ISBN

7 Usado

De EUR 7,06

16 Nuevo

De EUR 48,05

This 1975 third edition of a 1957 original presents the fundamental ideas of fluid flow, viscosity, heat conduction, diffusion, the energy and momentum principles, and the method of dimensional analysis. This book will be of value to anyone with an interest the wider applications of fluid mechanics and heat transfer.

"Sinopsis" puede pertenecer a otra edici�n de este libro.

Rese�a del editor

First published in 1975 as the third edition of a 1957 original, this book presents the fundamental ideas of fluid flow, viscosity, heat conduction, diffusion, the energy and momentum principles, and the method of dimensional analysis. These ideas are subsequently developed in terms of their important practical applications, such as flow in pipes and channels, pumps, compressors and heat exchangers. Later chapters deal with the equation of fluid motion, turbulence and the general equations of forced convection. The final section discusses special problems in process engineering, including compressible flow in pipes, solid particles in fluid flow, flow through packed beds, condensation and evaporation. This book will be of value to anyone with an interest the wider applications of fluid mechanics and heat transfer.

Product Description

Book by Kay J M Nedderman R M

"Sobre este t�tulo" puede pertenecer a otra edici�n de este libro.

EditorialCambridge University Press
A�o de publicaci�n1975
ISBN 10 0521098807
ISBN 13 9780521098809
Encuadernaci�nTapa blanda
IdiomaIngl�s
N�mero de edici�n3
N�mero de p�ginas340

Comprar usado

Condici�n: Bien

An Introduction to Fluid Mechanics...

Ver este art�culo

EUR 7,06

Convertir moneda

EUR 5,85 gastos de env�o desde Reino Unido a Estados Unidos de America

Destinos, gastos y plazos de env�o

A�adir al carrito

Comprar nuevo

Ver este art�culo

EUR 48,05

Convertir moneda

EUR 3,80 gastos de env�o en Estados Unidos de America

Destinos, gastos y plazos de env�o

A�adir al carrito

Otras ediciones populares con el mismo t�tulo

9780521205337: An Introduction to Fluid Mechanics and Heat Transfer: With Applications in Chemical and Mechanical Process Engineering

Edici�n Destacada

ISBN 10: 0521205336 ISBN 13: 9780521205337
Editorial: Cambridge University Press, 1975
Tapa dura

Resultados de la b�squeda para An Introduction to Fluid Mechanics and Heat Transfer,...

Imagen de archivo

An Introduction to Fluid Mechanics and Heat Transfer: With Applications in Chemical and Mechanical Process Engineering

Publicado por -, 1975

ISBN 10: 0521098807 ISBN 13: 9780521098809

Antiguo o usado Paperback

Librería: AwesomeBooks, Wallingford, Reino Unido

Calificaci�n del vendedor: 5 de 5 estrellas

Paperback. Condici�n: Very Good. An Introduction to Fluid Mechanics and Heat Transfer: With Applications in Chemical and Mechanical Process Engineering This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. N� de ref. del art�culo: 7719-9780521098809

Contactar al vendedor

Comprar usado

EUR 7,06

Convertir moneda

Gastos de env�o: EUR 5,85

De Reino Unido a Estados Unidos de America

Destinos, gastos y plazos de env�o

Cantidad disponible: 1 disponibles

A�adir al carrito

Imagen de archivo

An Introduction to Fluid Mechanics and Heat Transfer: With Applications in Chemical and Mechanical Process Engineering

Publicado por - -, 1975

ISBN 10: 0521098807 ISBN 13: 9780521098809

Antiguo o usado Paperback

Librería: Bahamut Media, Reading, Reino Unido

Calificaci�n del vendedor: 5 de 5 estrellas

Paperback. Condici�n: Very Good. This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. N� de ref. del art�culo: 6545-9780521098809

Contactar al vendedor

Comprar usado

EUR 7,06

Convertir moneda

Gastos de env�o: EUR 8,18

De Reino Unido a Estados Unidos de America

Destinos, gastos y plazos de env�o

Cantidad disponible: 1 disponibles

A�adir al carrito

Imagen de archivo

An Introduction to Fluid Mechanics and Heat Transfer : With Applications in Chemical and Mechanical Process Engineering

Kay, J. M., Nedderman, R. M.

Publicado por Cambridge University Press, 1975

ISBN 10: 0521098807 ISBN 13: 9780521098809

Antiguo o usado Tapa blanda

Librería: Better World Books Ltd, Dunfermline, Reino Unido

Calificaci�n del vendedor: 5 de 5 estrellas

Condici�n: Good. 3 Revised. Ships from the UK. Former library book; may include library markings. Used book that is in clean, average condition without any missing pages. N� de ref. del art�culo: GRP69333736

Contactar al vendedor

Comprar usado

EUR 7,26

Convertir moneda

Gastos de env�o: EUR 9,38

De Reino Unido a Estados Unidos de America

Destinos, gastos y plazos de env�o

Cantidad disponible: 1 disponibles

A�adir al carrito

Imagen de archivo

An Introduction to Fluid Mechanics and Heat Transfer, Third Edition (with Applications in Chemical and Mechanical Process Engineering)

Kay, J. M.; Nedderman, R. M.

Publicado por Cambridge University Press, 1974

ISBN 10: 0521098807 ISBN 13: 9780521098809

Antiguo o usado Soft Cover

Librería: Nighttown Books, Powell, WY, Estados Unidos de America

Calificaci�n del vendedor: 5 de 5 estrellas

Soft Cover. Condici�n: Very Good. Softcover 3rd Ed, 1st Printing in green wraps, no markings, no spine/cover creases, shelf rub & edge wear, general signs of age & use, else clean tight nice copy; 8vo; xvi + 322pp indexed. N� de ref. del art�culo: 30840

Contactar al vendedor

Comprar usado

EUR 27,29

Convertir moneda

Gastos de env�o: EUR 5,26

A Estados Unidos de America

Destinos, gastos y plazos de env�o

Cantidad disponible: 1 disponibles

A�adir al carrito

Imagen de archivo

An Introduction to Fluid Mechanics and Heat Transfer: With Applications in Chemical and Mechanical Process Engineering

Kay, J. M., Nedderman, R. M.

Publicado por Cambridge University Press, 1975

ISBN 10: 0521098807 ISBN 13: 9780521098809

Antiguo o usado Tapa blanda

Librería: Powell's Bookstores Chicago, ABAA, Chicago, IL, Estados Unidos de America

Calificaci�n del vendedor: 5 de 5 estrellas

Condici�n: Used - Very Good. 1984. Paperback. Some shelf-wear, previous owner's name in pen under front cover. Very Good. N� de ref. del art�culo: S70090

Contactar al vendedor

Comprar usado

EUR 29,57

Convertir moneda

Gastos de env�o: EUR 3,53

A Estados Unidos de America

Destinos, gastos y plazos de env�o

Cantidad disponible: 1 disponibles

A�adir al carrito

Imagen de archivo

An Introduction to Fluid Mechanics and Heat Transfer: With Applications in Chemical and Mechanical Process Engineering

Kay, J. M.

Publicado por Cambridge University Press, 1979

ISBN 10: 0521098807 ISBN 13: 9780521098809

Antiguo o usado Tapa blanda

Librería: Anybook.com, Lincoln, Reino Unido

Calificaci�n del vendedor: 5 de 5 estrellas

Condici�n: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In fair condition, suitable as a study copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,500grams, ISBN:0521098807. N� de ref. del art�culo: 5557910

Contactar al vendedor

Comprar usado

EUR 27,37

Convertir moneda

Gastos de env�o: EUR 13,92

De Reino Unido a Estados Unidos de America

Destinos, gastos y plazos de env�o

Cantidad disponible: 1 disponibles

A�adir al carrito

Imagen de archivo

An Introduction to Fluid Mechanics and Heat Transfer, Third Edition: With Applications in Chemical and Mechanical Process Engineering

Kay, J. M.

Publicado por Cambridge University Press, 1975

ISBN 10: 0521098807 ISBN 13: 9780521098809

Nuevo Paperback

Librería: Toscana Books, AUSTIN, TX, Estados Unidos de America

Calificaci�n del vendedor: 5 de 5 estrellas

Paperback. Condici�n: new. Excellent Condition.Excels in customer satisfaction, prompt replies, and quality checks. N� de ref. del art�culo: Scanned0521098807

Contactar al vendedor