Artículos relacionados a Manufacturing Technology in the Electronics Industry:...
Sinopsis
The sequence of events which led to the writing of this book started at a seminar on Manufacturing Technology in the Electronics Industry given by the Institution of Production Engineers in 1987. The seminar identified that the field of manufacturing engineering for the electronics industry was effectively missing from the vast majority of production engineering degree courses. The reason for this was that production engineering departments typically spring from mechanical engineering departments. This leads to a mechanical bias in the practical aspects of such courses. The consequence of this was that electronics companies could not recruit graduates with both relevant production engineering and electronic engineering backgrounds. This necessitated either recruiting production engineering graduates and giving them the necessary electronic engineering training, or giving production engineering training to electronic engineering graduates. A consequence of the lack of courses in a subject is that there is also a lack of relevant textbooks in the area, as most textbooks are intended to tie into courses. In the field of manufacturing technology for the electronics industry, existing textbooks tend to be highly specialized and mainly concerned with the fabrication of semiconductor devices.
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
The sequence of events which led to the writing of this book started at a seminar on Manufacturing Technology in the Electronics Industry given by the Institution of Production Engineers in 1987. The seminar identified that the field of manufacturing engineering for the electronics industry was effectively missing from the vast majority of production engineering degree courses. The reason for this was that production engineering departments typically spring from mechanical engineering departments. This leads to a mechanical bias in the practical aspects of such courses. The consequence of this was that electronics companies could not recruit graduates with both relevant production engineering and electronic engineering backgrounds. This necessitated either recruiting production engineering graduates and giving them the necessary electronic engineering training, or giving production engineering training to electronic engineering graduates. A consequence of the lack of courses in a subject is that there is also a lack of relevant textbooks in the area, as most textbooks are intended to tie into courses. In the field of manufacturing technology for the electronics industry, existing textbooks tend to be highly specialized and mainly concerned with the fabrication of semiconductor devices.
Reseña del editor
Primarily concerned with the manufacturing aspects of the electronics industry, this work is designed to serve as an introductory text on manufacturing processes for trainee or student manufacturing engineers, as well as electrical engineers concerned with the manufacturing side. Starting with the individual electronic components, the text addresses the design processes involved, the fabrication of semiconductor devices and the manufacture of complete printed circuit boards. It concludes with a discussion of non-standard electronic devices and interconnection methods.
"Sobre este título" puede pertenecer a otra edición de este libro.
EUR 17,66
EUR 9,21 gastos de envío desde Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envíoComprar nuevo
Ver este artículo
EUR 52,32
EUR 3,43 gastos de envío en Estados Unidos de America
Destinos, gastos y plazos de envíoOtras ediciones populares con el mismo título
Resultados de la búsqueda para Manufacturing Technology in the Electronics Industry:...
Imagen de archivo
Manufacturing Technology in the Electronics Industry : An Introduction
Publicado por
Springer Netherlands, 1991
ISBN 10: 0412371308
ISBN 13: 9780412371301
Antiguo o usado
Tapa blanda
Librería: Better World Books Ltd, Dunfermline, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: Good. Ships from the UK. Former library book; may include library markings. Used book that is in clean, average condition without any missing pages. Nº de ref. del artículo: GRP70825102
Gastos de envío:
EUR 9,21
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles
Imagen de archivo
Manufacturing Technology in the Electronics Industry: An introduction
Librería: Lucky's Textbooks, Dallas, TX, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Nº de ref. del artículo: ABLIING23Feb2215580180504
Cantidad disponible: Más de 20 disponibles
Imagen de archivo
Manufacturing Technology in the Electronics Industry (Paperback)
Publicado por
Chapman and Hall, London, 1991
ISBN 10: 0412371308
ISBN 13: 9780412371301
Nuevo
Paperback
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: new. Paperback. Primarily concerned with the manufacturing aspects of the electronics industry, this work is designed to serve as an introductory text on manufacturing processes for trainee or student manufacturing engineers, as well as electrical engineers concerned with the manufacturing side. Starting with the individual electronic components, the text addresses the design processes involved, the fabrication of semiconductor devices and the manufacture of complete printed circuit boards. It concludes with a discussion of non-standard electronic devices and interconnection methods. This necessitated either recruiting production engineering graduates and giving them the necessary electronic engineering training, or giving production engineering training to electronic engineering graduates. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Nº de ref. del artículo: 9780412371301
Cantidad disponible: 1 disponibles
Imagen de archivo
Manufacturing Technology in the Electronics Industry: An Introduction
Librería: AwesomeBooks, Wallingford, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Very Good. Manufacturing Technology in the Electronics Industry: An Introduction This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. . Nº de ref. del artículo: 7719-9780412371301
Gastos de envío:
EUR 5,74
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles
Imagen de archivo
Manufacturing Technology in the Electronics Industry: An Introduction
Publicado por
Springer 04/10/2013, 2013
ISBN 10: 0412371308
ISBN 13: 9780412371301
Antiguo o usado
Paperback
Librería: Bahamut Media, Reading, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee. Nº de ref. del artículo: 6545-9780412371301
Gastos de envío:
EUR 8,03
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles
Imagen de archivo
Manufacturing Technology in the Electronics Industry: An introduction
Librería: Ria Christie Collections, Uxbridge, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: New. In. Nº de ref. del artículo: ria9780412371301_new
Gastos de envío:
EUR 13,79
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: Más de 20 disponibles
Imagen de archivo
Manufacturing Technology in the Electronics Industry : An introduction
Librería: Chiron Media, Wallingford, Reino Unido
Calificación del vendedor: 4 de 5 estrellas
PF. Condición: New. Nº de ref. del artículo: 6666-IUK-9780412371301
Gastos de envío:
EUR 17,83
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 10 disponibles
Imagen del vendedor
Manufacturing Technology in the Electronics Industry
Publicado por
Springer Netherlands, Springer Aug 1991, 1991
ISBN 10: 0412371308
ISBN 13: 9780412371301
Nuevo
Taschenbuch
Librería: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Alemania
Calificación del vendedor: 5 de 5 estrellas
Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The sequence of events which led to the writing of this book started at a seminar on Manufacturing Technology in the Electronics Industry given by the Institution of Production Engineers in 1987. The seminar identified that the field of manufacturing engineering for the electronics industry was effectively missing from the vast majority of production engineering degree courses. The reason for this was that production engineering departments typically spring from mechanical engineering departments. This leads to a mechanical bias in the practical aspects of such courses. The consequence of this was that electronics companies could not recruit graduates with both relevant production engineering and electronic engineering backgrounds. This necessitated either recruiting production engineering graduates and giving them the necessary electronic engineering training, or giving production engineering training to electronic engineering graduates. A consequence of the lack of courses in a subject is that there is also a lack of relevant textbooks in the area, as most textbooks are intended to tie into courses. In the field of manufacturing technology for the electronics industry, existing textbooks tend to be highly specialized and mainly concerned with the fabrication of semiconductor devices. 256 pp. Englisch. Nº de ref. del artículo: 9780412371301
Gastos de envío:
EUR 23,00
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 2 disponibles
Imagen de archivo
Manufacturing Technology in the Electronics Industry
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, Irlanda
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Designed as an introductory text for trainee engineers going into the electronics industry, this work focuses on manufacturing processes used. It deals with electronic components, design processes and the fabrication of semiconductor devices and printed circuit boards. Num Pages: 256 pages, 69 black & white illustrations, biography. BIC Classification: TGP; TJFC. Category: (P) Professional & Vocational; (UU) Undergraduate. Dimension: 229 x 152 x 13. Weight in Grams: 379. . 1991. Paperback. . . . . Nº de ref. del artículo: V9780412371301
Gastos de envío:
EUR 10,50
De Irlanda a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 15 disponibles
Imagen de archivo
Manufacturing Technology in the Electronics Industry: An introduction
Publicado por
Chapman and Hall, 1991
ISBN 10: 0412371308
ISBN 13: 9780412371301
Nuevo
Paperback / softback
Librería: THE SAINT BOOKSTORE, Southport, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback / softback. Condición: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days 380. Nº de ref. del artículo: C9780412371301
Gastos de envío:
EUR 16,75
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: Más de 20 disponibles