HAZOP: Guide to Best Practice - Tapa blanda

HAZOP: Guide to Best Practice, 3rd Edition describes and illustrates the HAZOP study method, highlighting a variety of proven uses and approaches. This updated edition brings additional experience with which to assist the reader in delivering optimum safety and efficiency of performance of the HAZOP team. HAZOP is the most widely-used technique in the process industries for the identification of hazards and the planning of safety measures.

This book explains how to implement HAZOP techniques in new facilities and apply it to existing facilities. The content covers many of the possible applications of HAZOP and takes you through all the stages of a study. This simple, easily digestible book is a favorite in the chemical and process industries.

After 10 years in the Offshore O & G Industry, retiring from BP, Crawley split his time as LP Consultant and Senior Lecturer in Academe. It was during his time in the O & G industry that he learned different ways in which the HAZOP tool could be used more, particularly the first “Drilling HAZOP in UKCS some 33 years ago. This in particular revealed a number of deficiencies in the design of drill rigs which produced novel design changes.

HAZOP has been his fascination and he believes that it is a very flexible tool which has more potential for development.Charter Chemical Engineer. 7 Years of experience in Production, Commissioning and Start Up of Olefine Plants (1963 - 70). 10 years of special duties on Nylon Intermediates much as the result of the Flixborough Explosion under the tutelage of the late Trevor Kletz (1970 - 81). 10 years of leading the Loss Prevention group in an oil major (1981- 91). 10 year consultancy in the oil industry (1991 - 2001) and 15 years in Academe (Chem Eng) (1991- 20006). Over 50 refereed technical papers under IChemE and others. IChemE Franklin Medal for teaching Safety at under and post graduate levels. Co-author of the IChemE books: HAZOP: Guide to best practice and Hazard Identification Methods with Brian Tyler.

Brian Tyler established his consulting company with his colleague Bob Simmons in 1990. At that time he was also on the staff of the chemistry department at the University of Manchester Institute of Science and Technology (UMIST). His research work at that time focused on the areas of fire, explosion, self-heating and kinetics, including work on industrially related problems. By 1990 he had over 20 years’ experience of organising meetings and courses under the general heading ‘Safety in the Chemical Industry’. These included HAZOP and HAZAN, Fire and Explosion, Accident Investigation, Gas Dispersion and many others. His course “HAZOP study for team leaders and team members" is still run by the IChemE under the leadership of Phil Aspinall. Another major activity has been the authorship to two IChemE monographs. The first, written with Frank Crawley and Malcolm Preston, is ‘HAZOP, Guide to Best Practice’; the second with Frank Crawley is ‘Hazard Identification Methods’. In 2011 he was one of the first group elected to the newly established class of Associate Fellow of the Institution of Chemical Engineers.Physical chemist. Cambridge University and UMIST. Research into gas phase processes and explosions including self-heating of solids and gases. Organiser of the Safety in the Chemical Industry postgraduate courses held at UMIST from 1969 to 1990, especially covering HAZOP and HAZAN. With S&T Consultants from 1990-2015 delivering training courses on HAZOP and other safety methods within the UK and overseas. Co-author of the IChemE books: HAZOP: Guide to best practice and Hazard Identification Methods.