Programmable Logic Controllers

3,32 valoración promedio
( 19 valoraciones por Goodreads )
 
9780135048818: Programmable Logic Controllers
Ver todas las copias de esta edición ISBN.
 
 
Reseña del editor:

For courses in Programmable Logic Controllers where the Allen/Bradley programmable logic controller is the controller of choice. This text focuses on the theory and operation of PLC systems with an emphasis on program analysis and development. The book is written in easy-to-read and understandable language with many crisp illustrations and practical examples. It describes the PLC instructions for the Allen-Bradley PLC 5, SLC 500, and Logix processors with an emphasis on the SLC 500 system using numerous figures, tables, and example problems. The text features a new two-column and four-color interior design that improves readability and figure placement. The book's organization also has improved; all the chapter questions and problems are listed in one convenient location in Appendix D with page locations for all chapter references in the questions and problems. This book describes the technology in a clear, concise style that is effective in helping students who have no previous experience in PLCs or discrete and analog system control. For additional resources, visit these web sites:http://plctext.com/ http://plcteacher.com

Biografía del autor:

"James A. Rehg, CMfgE," is an Associate Professor of Engineering at Penn State Altoona, where he teaches automation controls courses in the BS program in Electromechanical Engineering Technology. He earned both a Bachelor of Science degree and a Master of Science degree in Electrical Engineering from St. Louis University and has completed additional graduate study at Wentworth Institute, University of Missouri, South Dakota School of Mines and Technology, and Clemson University. Before coming to Penn State Altoona, he was the CIM coordinator and department head of CAD/CAM/Machine Tool Technology at Tri-County Technical College. Prior to that, he was the Dean of Engineering Technology and Director of Academic Computing at Trident Technical College in Charleston, South Carolina. He held the position of Director of the Robotics Resource Center at Piedmont Technical College in Greenwood, South Carolina, and was department head of Electronic Engineering Technology of Forest Park Community College in St. Louis, Missouri. In addition, he was a Senior Instrumentation Engineer for Boeing in St. Louis. Professor Rehg has authored five texts on robotics and automation and has presented numerous papers on subjects related directly to training in automation and robotics. He has also been a consultant to nationally recognized corporations and many educational institutions. He has led numerous seminars and workshops in the areas of robotics and microprocessors and has developed extensive seminar training material. In addition, he has received numerous state awards for excellence in teaching and was named the outstanding instructor in the nation by the Association of Community College Trustees.

"Henry W. Kraebber, PE, CPIM," is a Professor of Mechanical Engineering Technology at Purdue University in West Lafayette, Indiana. He has fifteen years of experience and leadership in manufacturing operations, engineering, quality, and management. He has worked at the Collins Avionics and Missiles group of Rockwell International, the Plough Products Division of Schering-Plough Corporation, and Flavorite Laboratories, Inc. His work has supported the production of industrial, consumer, and military products in the food, consumer products, and electronics areas. He currently teaches courses in manufacturing operations, manufacturing quality control, and integrated systems in the Computer-Integrated Manufacturing Technology degree program. Mr. Kraebber earned a Bachelor of Science degree in Industrial Engineering from Purdue University and a Master of Engineering degree in Industrial Engineering from Iowa State University. He is President of the CIM in Higher Education (CIM/HE) Alliance, a nonprofit corporation that supports CIM and manufacturing education. He is a senior member of the Society of Manufacturing Engineers (SME) and the Institute of Industrial Engineers (IIE). He is an active member of the American Production and Inventory Control Society (APICS) and has served as President and Vice President of Education for the Wabash Valley Chapter.

"Sobre este título" puede pertenecer a otra edición de este libro.

Comprar nuevo Ver este artículo

Gastos de envío: EUR 3,28
A Estados Unidos de America

Destinos, gastos y plazos de envío

Añadir al carrito

Los mejores resultados en AbeBooks

Imagen de archivo

1.

Rehg, James A.
Publicado por Pearson
ISBN 10: 0135048818 ISBN 13: 9780135048818
Nuevo Cantidad disponible: 1
Librería
My Books Store
(Tallahassee, FL, Estados Unidos de America)

Descripción Pearson. Condición: new. 2. Book is in NEW condition. Satisfaction Guaranteed! Fast Customer Service!!. Nº de ref. del artículo: MBSN0135048818

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 131,64
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,28
A Estados Unidos de America
Destinos, gastos y plazos de envío
Imagen de archivo

2.

James A. Rehg, Glenn J. Sartori
Publicado por Prentice Hall (2008)
ISBN 10: 0135048818 ISBN 13: 9780135048818
Nuevo Tapa dura Cantidad disponible: 1
Librería
Ergodebooks
(Richmond, TX, Estados Unidos de America)

Descripción Prentice Hall, 2008. Hardcover. Condición: New. 2. Nº de ref. del artículo: DADAX0135048818

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 137,71
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío
Imagen de archivo

3.

Rehg, James A.; Sartori, Glenn J.
Publicado por Pearson (2008)
ISBN 10: 0135048818 ISBN 13: 9780135048818
Nuevo Tapa dura Cantidad disponible: 1
Librería
GlassFrogBooks
(Hawthorne, CA, Estados Unidos de America)

Descripción Pearson, 2008. Hardcover. Condición: New. A+ Customer service! Satisfaction Guaranteed! Book is in NEW condition. Nº de ref. del artículo: 0135048818-2-1

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 179,10
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío
Imagen de archivo

4.

Rehg, James A.; Sartori, Glenn J.
Publicado por Pearson (2008)
ISBN 10: 0135048818 ISBN 13: 9780135048818
Nuevo Tapa dura Cantidad disponible: 1
Librería
GoldenWavesOfBooks
(Fayetteville, TX, Estados Unidos de America)

Descripción Pearson, 2008. Hardcover. Condición: new. Nº de ref. del artículo: Holz_New_0135048818

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 258,50
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,29
A Estados Unidos de America
Destinos, gastos y plazos de envío
Imagen de archivo

5.

Rehg, James A.; Sartori, Glenn J.
Publicado por Pearson (2008)
ISBN 10: 0135048818 ISBN 13: 9780135048818
Nuevo Tapa dura Cantidad disponible: 2
Librería
SGS Trading Inc
(Franklin Lakes, NJ, Estados Unidos de America)

Descripción Pearson, 2008. Hardcover. Condición: New. New US Edition Textbook, Ships with Emailed Tracking from USA. Nº de ref. del artículo: Nov21-17new-978013504881

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 303,21
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,20
A Estados Unidos de America
Destinos, gastos y plazos de envío
Imagen de archivo

6.

Rehg, James A.; Sartori, Glenn J.
Publicado por Pearson (2008)
ISBN 10: 0135048818 ISBN 13: 9780135048818
Nuevo Tapa dura Cantidad disponible: 1
Librería
GoldBooks
(Austin, TX, Estados Unidos de America)

Descripción Pearson, 2008. Hardcover. Condición: new. Nº de ref. del artículo: think0135048818

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 428,05
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío