Artículos relacionados a Manufacturing Engineering and Technology: International...
Reseña del editor
Introductory Manufacturing courses at 2-yr and 4-yr. schools. Manufacturing Engineering and Technology has set the standard for instructors that wish to introduce their students to the scope and variety of manufacturing processes. The book describes both time-tested and modern methods of manufacturing engineering materials. The book's popularity is due to its complete coverage and the author's writing style.
Biografía del autor
PROFESSOR SEROPE KALPAKJIAN has been teaching at the Illinois Institute of Technology since 1963. After graduating from Robert College (with High Honors), Harvard University, and the Massachusetts Institute of Technology, he joined Cincinnati Milacron, Inc., where he was a research supervisor in charge of advanced metal-forming processes. He has published numerous papers and is the author of several articles in encyclopedias and handbooks; he has also edited various volumes and serves on the editorial boards of several journals and the Encyclopedia Americana. He is the author of three additional manufacturing books, two of which received the M. Eugene Merchant Manufacturing Textbook Award. He is a Life Fellow of the American Society of Mechanical Engineers, Fellow and Life Member of ASM International, and Fell of the Society of Manufacturing Engineers, and is a full member (Emeritus) of the International Institution for Production Engineering Research (CIRP). He is a founding member and a past president of the North American manufacturing Research Institution. Professor Kalpakjian has received several awards: Citation by the Forging Industry Educational and Research Foundation for best paper (1966); Citation by the Society of Carbide and Tool Engineers (1977); The "Excellence in Teaching Award" from the Illinois Institute of Technology (1970); the "Centennial Medallion" by the American Society of Mechanical Engineers (1980); the International "Education Award" by the Society of Manufacturing Engineers (1989); and the Albert Easton White Distinguished Teacher Award by the American Society for Metals International (2000). Dr. Steven R. Schmid is an Associate Professor in the Department of Aerospace and Mechanical Engineering at the University of Notre Dame, where he teaches and conducts research in manufacturing, machine design, and tribology. As the Director of the Manufacturing Tribology Laboratory at the university, he oversees industry and governmentally funded research on a wide variety of manufacturing topics, including tribological issues in rolling, forging and sheet metal forming, polymer processing, medical device design and manufacture, and nanomechanics. He received his Bachelor's degree in Mechanical Engineering from the Illinois Institute of Technology (with Honors) and Master's and Ph.D. degrees, both in Mechanical Engineering, from Northwestern University. Dr. Schmid is the recipient of a National Science Foundation CAREERS Award and an ALCOA Foundation Young Faculty Award. He has been a leading proponent for the integration of research and engineering education; NSF has sponsored workshops on this issue for which he has served as head of the steering committee. He is the author of over thirty technical papers in various journals, has edited three conference proceedings, has co-authored "Fundamentals of Machine Elements," and has contributed two chapters to the CRC "Handbook of Modern Tribology." He serves on the Tribology Division Executive Committee of the American Society of Mechanical Engineers, and has held officer positions in the Society of Manufacturing Engineers and the Society of Tribology and Lubrication Engineers. He is a registered Professional Engineer an a Certified Manufacturing Engineer.
"Sobre este título" puede pertenecer a otra edición de este libro.
- EditorialPearson
- Año de publicación2000
- ISBN 10 0130174408
- ISBN 13 9780130174406
- EncuadernaciónTapa blanda
- IdiomaInglés
- Número de páginas1148
EUR 4,44
EUR 23,95 gastos de envío desde Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envíoOtras ediciones populares con el mismo título
Resultados de la búsqueda para Manufacturing Engineering and Technology: International...
Imagen de archivo
Manufacturing Engineering and Technology (International Edition)
Publicado por
Prentice Hall, 2001
ISBN 10: 0130174408
ISBN 13: 9780130174406
Antiguo o usado
Tapa blanda
Librería: Anybook.com, Lincoln, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,2150grams, ISBN:0130174408. Nº de ref. del artículo: 8762561
Gastos de envío:
EUR 23,95
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles
Imagen de archivo
Manufacturing Engineering and Technology
Publicado por
Prentice Hall, 1999
ISBN 10: 0130174408
ISBN 13: 9780130174406
Antiguo o usado
Tapa blanda
Librería: Anybook.com, Lincoln, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: Poor. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In poor condition, suitable as a reading copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,2200grams, ISBN:9780130174406. Nº de ref. del artículo: 8609009
Gastos de envío:
EUR 23,95
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles
Imagen de archivo
Manufacturing Engineering and Technology (International Edition)
Librería: WorldofBooks, Goring-By-Sea, WS, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged. Nº de ref. del artículo: GOR004881202
Gastos de envío:
EUR 6,66
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 2 disponibles
Imagen de archivo
Manufacturing, Engineering and Technology
Publicado por
Prentice Hall International, London, 2000
ISBN 10: 0130174408
ISBN 13: 9780130174406
Antiguo o usado
Soft cover
Librería: Books@Ruawai, Kaipara District, Nueva Zelanda
Calificación del vendedor: 4 de 5 estrellas
Soft cover. Condición: Good. Fourth, International Edition. A heavy book, extra postage may apply. Nº de ref. del artículo: 025329
Gastos de envío:
EUR 31,35
De Nueva Zelanda a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles