manual experimental methods mechanical (16 resultados)

Paperback. Condición: Very Good+. Asian Ed. Same text as hard cover US ed. Media shipping, US only; 4to - over 9¾" - 12" tall.

Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,900grams, ISBN:1851663754.

Condición: New. In.

Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., 'Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material,' Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., 'Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations,' Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., 'Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires,' J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., 'Radial Tire Cord-Rubber Composite,' Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., 'Developments in the Design and Use of Liquid-Metal Strain Gages,' EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., 'The Measurement of Volume Changes in Human Limbs, ' J. Physiology, 121, 1-27 (1953).

Condición: New. pp. 180.

Soft cover. Condición: New. Language:Chinese.Author:WANG XI SHU.Binding:Soft cover.Publisher:Tsinghua University Press Pub. Date :2010-09-01.

Paperback. Condición: Brand New. 180 pages. 10.99x8.26x0.43 inches. In Stock.

Condición: New.

Paperback. Condición: Like New. Like New. book.

hardcover. Condición: Very Good. Very Good. book.

Hardcover. Condición: Very Good. Very Good. book.

Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., 'Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material,' Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., 'Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations,' Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., 'Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires,' J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., 'Radial Tire Cord-Rubber Composite,' Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., 'Developments in the Design and Use of Liquid-Metal Strain Gages,' EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., 'The Measurement of Volume Changes in Human Limbs, ' J. Physiology, 121, 1-27 (1953). 180 pp. Englisch.

Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., Numerical Analysis of the Reinforcement Effect of a .

Condición: New. Print on Demand pp. 180 6:B&W 8.25 x 11 in or 280 x 210 mm Perfect Bound on White w/Gloss Lam.

Taschenbuch. Condición: Neu. This item is printed on demand - Print on Demand Titel. Neuware -References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., 'Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material,' Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., 'Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations,' Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., 'Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires,' J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., 'Radial Tire Cord-Rubber Composite,' Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., 'Developments in the Design and Use of Liquid-Metal Strain Gages,' EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., 'The Measurement of Volume Changes in Human Limbs, ' J. Physiology, 121, 1-27 (1953).Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 180 pp. Englisch.

Condición: New. PRINT ON DEMAND pp. 180.