cartech inc north branch (470 resultados)

Paperback. Condición: VG+. Very light edge wear, clean copy.

Soft cover. Condición: Very Good. White & blue pictorial covers. 4to, 198pp.

Soft cover. Condición: Very Good. Covers 221, 260, 289, 302, 351w, 351c, 351m, and 400m engines. Over 500 black and white photographs.

Paperback. Condición: new. Paperback. Learn the step-by-step procedures for tearing down, rebuilding, and improving the most popular Jeep transfer cases by using this comprehensive manual written with the do-it-yourselfer in mind. The transfer case is arguably the heart of any Jeep. It's the key component that splits power to the front and rear axles and ultimately provides the traction that has allowed Jeep to maintain its legendary off-road status for nearly 80 years. Jeep used several different transfer cases in its various vehicle models, many of which have an excellent reputation and remain sought after today. But even the best mechanical components can wear over time and need periodic service to ensure decades of reliable service.While transfer cases may seem complicated on the surface, they can be successfully rebuilt by a competent weekend mechanic with surprisingly few specialized tools. Jeep Transfer Cases: How to Rebuild covers rebuilding the most popular and widely used transfer cases found in dozens of Jeep models for decades, including the Dana 18, Dana 20, Dana 300, and the NP231. The entire rebuild process is shown from beginning to end while providing valuable pointers, complete specifications, and a list of the specialized tools that are required. Also included are tips for upgrading these cases for better strength and off-road performance, including deeper low-range gearsets, slip-yoke eliminator (SYE) kits, and much more.Author Trenton McGee has written hundreds of technical articles on virtually every component on 4x4 vehicles for off-road magazines. McGee takes a layman's approach to tackling complex tasks while avoiding complex technical jargon. This book will help you better understand your transfer case and determine if rebuilding your transfer case is for you or your local 4x4 repair shop. "This book provides information on how to rebuild a Jeep transfer case"-- Provided by publisher. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Learn how to get the most horsepower out of the popular small-block Ford with this all-new full-color guide.Much of the attention of the performance aftermarket has turned to the Coyote platform and swaps, but Ford is a little different than GM and Chrysler in that regard. The sheer size of the Coyote engine is problematic because it is very difficult to fit into any vehicle with shock towers. However, the shock-tower cars are often the most popular cars to modify. As such, the small-block Ford remains a viable option for making a large amount of horsepower in a much more affordable package. In Ford Small-Block Engines: How to Build Max Performance, Ford expert Jim Smart covers all of the major components, including crankshafts, rods and pistons, camshafts, the valvetrain, oiling systems, intakes, carburetors, ignition systems and exhaust systems. Featured are the latest street heads from AFR, Dart, Ford Performance, Edelbrock, and other prominent manufacturers. Aftermarket blocks are also covered extensively from a variety of manufacturers, such as Ford Performance, Dart, Speedmaster, Bill Mitchell Products, and World Products. The basic design of this engine is more than 60 years old, but the aftermarket for this powerplant has grown over the years and is still growing. While the Coyote engine family has earned a strong following, the original Ford small-block engine retains just as strong of a following, with the massive number of these engines still in use throughout the hobby. Whether you want to get started on your build or you just want to learn about the small-block Ford's capabilities, this book will make a great addition to your library. "This book provides information on how to build max performance with Ford small-block engines"-- Provided by publisher. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Learn about the rarest muscle cars ever produced with this new book. In the world of muscle cars, many were produced and sold in large enough quantities that they would be considered special but not particularly rare at the time of production. The Boss 429 and Plymouth Superbird were produced for racing homologation reasons, and since they were very expensive to produce, the manufacturers ensured that they would be rare. However, there is rare, and then there is rare. Prototypes and special factory builds, factory production cars, and super car tuners and builders are all covered in this new book by muscle-car historian Wes Eisenschenk. Some are single examples, some are very close to being the last remaining example, and all are extremely rare. Some have no surviving example known to exist. Featured cars include a Boss 429 Cougar, a 1971 Pontiac Ventura II Sprint 455, a 1965 Chevelle 300 COPO car with the L78 option, and a 1970 FK5 Deep Burnt Orange Metallic Superbird. Dealer promotional specials include a 1968 AMC AMX Von Piranha, a 1970 Dick Harrell LS6 454 Camaro, and a 1973 Nickey Chevrolet 427 Nova. These are cars that you will read about but likely never see. For a fun ride through muscle-car history and great stories of the rarest muscle cars ever produced, add this book to your automotive library today. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Immerse yourself in all aspects of muscle car model kits with this detailed volume by author Tim Boyd, a world-leading authority on the subject.Boyd walks you through the entire era of muscle car model kits, covering the options, collectability, variety, availability, and value of these wonderful kits today. He also shows the differences between original kits, older reproduction kits, and new reproduction kits that many enthusiasts find at swap meets today.In the 1960s, model kit building was a huge hobby. Kids built plastic kits of planes, tanks, race cars, spaceships, creatures from scary movies, you name it. Before baseball card collecting, Pokemon, and video games, model kit building was one of the most popular hobby activities. Car and airplane kits were the most popular, and among the car kits, muscle cars, as we know them today, were one of the most popular categories.Many owners of real muscle cars today were not old enough to buy them when the cars were new, of course. Yet kids of the 1960s and 1970s worshiped these cars to an extent completely foreign to kids today. If you couldn't afford or were too young to buy a muscle car back then, what could you do? For many, the next best thing was to buy, collect, and build muscle car kits from a variety of kit companies. Hundreds of different kits were made. Many of these kits have become collectible today, especially in original, unassembled form.Although people still build kits today, there is a broad market for collectors of nostalgic model kits. People love the kits for the great box art, to rekindle fond memories of building them 40 years ago, or even as a companion to the full-scale cars they own today. If you are looking to build a collection of muscle car kits, interested in getting the kits of your favorite manufacturer or even just of the cars you have owned, this book will be a valuable resource in your model kit search. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. In an era before corporate average fuel economy (CAFE) requirements and emissions standards, a pioneering General Motors executive was tasked with taking over a dying division and returning it to profitability. In June 1956, Semon E. "Bunkie" Knudsen became the general manager of the Pontiac Motor Division. He injected the stodgy, boring product line with a large dose of performance. "Race on Sunday; sell on Monday" was Knudsen's philosophy. Although the idea of Pontiac getting into racing was far-fetched in 1956, Knudsen had a plan. In 1957, Pontiac released the Bonneville, which was a limited-edition, fuel-injected, high-performance convertible that was aimed directly at the burgeoning enthusiast market. Knudsen skillfully crafted a new youthful persona for Pontiac, and the sales began to climb. Pontiac's Super Duty factory-built drag cars produced an amazing line of winners. The performance mentality was clearly working, as Pontiac sales jumped to third place among the manufacturers--behind only Chevrolet and Ford. After GM ceased all racing activities in 1963, Pontiac hardly missed a beat. In 1964, the GTO was released, and a new market segment (the muscle car) was born, which sent the competition back to the drawing boards.In addition, Pontiac continued to create iconic muscle cars, including the 2+2, the Ram-Air GTO and Firebird, the Trans Am, the Judge, and the Firebird Formula. Re-live Pontiac's golden era with Pontiac Performance 1960-1974: The Era of the Super Duty, H.O., & Ram Air Drag & Muscle Cars! Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Learn how to rebuild and modify the GM 4L80E transmission!As the successor to the venerable and popular Turbo Hydra-matic 400 (TH400), the 4L80E was the next flag bearer in GM's line of automatic transmissions. While serving as the smaller, lighter cousin to the 4L85E, the abundance of 4L80E transmissions manufactured between 1991 and 2013 ensures that these highly capable 4-speed overdrive units will be in service for years to come.Automatic transmissions are often seen as mysterious and overly complicated, but much of the guesswork has been simplified to its basic elements in this easy-to-follow guide. This book covers the process of identifying the best versions, tearing down the 4L80E, rebuilding, reassembly, and troubleshooting. Upgrades that are available for the 4L80E, which is a popular topic among performance fans and transmission swappers, are also included.This detailed, step-by-step instructional manual is authored by racer and builder Eric McClellan. Meticulous step-by-step photos of the rebuild process are featured along with torque specs and unique identification of all major and most minor components. "This book provides information on how to rebuild and modify GM 4L80E transmissions"-- Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Countless collector car owners are skilled at performing mechanical work, but for many of them, electrical work seems like a mystery, too complicated and too confusing. However, electrical upgrades are absolutely essential for a high-performance classic car or a modified car to perform at its best. With a firm understanding of the fundamentals, you can take this comprehensive guide and complete a wide range of electrical projects that enhance the performance and functionality of a vehicle. In this revised edition (formerly titled Automotive Electrical Performance Projects) brilliant color photos and explanatory step-by-step captions detail the installation of the most popular, functional, and beneficial upgrades for enthusiasts of varying skill levels. Just a few of the projects included are: maximizing performance of electric fans; installing electronic gauges; upgrading charging systems; and installing a complete aftermarket wiring harness, which is no small task. Each facet is covered in amazing detail. Veteran author Tony Candela, who wrote CarTech's previous best-selling title Automotive Wiring and Electrical Systems, moves beyond the theoretical and into real-world applications with this exciting and detailed follow-up. This Volume 2 is essential for any enthusiast looking to upgrade his or her classic vehicle to modern standards, and for putting all the knowledge learned in Automotive Wiring and Electrical Systems into practice. This book is a 2015 International Automotive Media Competition (IAMC) Silver Award Winner. In this revised edition, brilliant color photos and explanatory step-by-step captions detail the installation of the most popular, functional, and beneficial upgrades for enthusiasts of varying skill levels. This volume is essential for anyone looking to upgrade his or her classic vehicle to modern standards. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. >> Covers 700-R4, 4L60 and 4L60E transmissions. There's an important component standing between your engine and your drive wheels: the transmission. Inside that metal case is a bewildering array of gears, bearings, seals, and more. The automatic transmission is a miracle of modern engineering, but it can also be a source of trouble. If your transmission breaks down you're not going anywhere, and if it's just not working properly, your car will never realize its performance potential. In this book, expert mechanic and drag racer Cliff Ruggles demystifies the popular GM 700-R4 and 4L60 automatic transmissions. Keeping the enthusiast in mind, Ruggles explains the history of these transmissions, presents critical identification guidelines, and leads the reader through the complete disassembly, repair and upgrade, and assembly processes. DIY-ers will learn how to test their transmission to ensure its proper operation before installing it in the car. This book includes information about high-performance modifications, both from the factory and the aftermarket. These include internal parts and external components such as shift kits and torque converters that will help you make your transmission perform at its best. It also covers common installation issues such as mounting, shifters and linkages, wiring harnesses, and more, and includes a special section by Ro McGonegal on swapping these transmissions into earlier performance and musclecar chassis. Includes "Swapper's Source Guide," p. 125-126. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Learn to rebuild and modify the Ford Toploader 4-speed transmission, which shifted millions of Ford performance cars.Ford muscle cars of the 1960s helped the Toploader transmission quickly gain a reputation as the best of Detroit's new 4-speeds. Introduced in 1964, this transmission was an immediate upgrade over prior models, and it paired well with Ford engines, such as the 289, 302, 351 (Windsor and Cleveland), 390, 427, 428, and 429 (Cobra Jet and Boss). The Toploader manual transmission was used in cars from Cobras to Galaxies and was mandatory equipment in the Boss cars. The simplicity of the Toploader transmission lends to an easy understanding of its operating procedure within its effective design. Even though the transmission was phased out toward the end of the muscle-car era (1973), the Toploader is still alive and well today, shifting race cars and performance cars with speed and ease. This book features step-by-step procedures in an easy-to-follow format by award-winning motorsports author John Carollo. It shows the intricacies of how Toploaders work, aiding in their repair and offering a full rebuild blueprint. Upgrading a Toploader is also covered using today's modern parts to keep this versatile transmission relevant. Learn what to look for with Toploader parts, where and how they fit, and how they operate together via hundreds of informative color images. The Toploader shifted legendary cars, such as the Fairlane 427, Boss 302 Cougar, and the Mach 1 Super Cobra Jet. Whether you want to rebuild a Toploader yourself or you want to learn about the process and hire a professional, this expertly written book guides you through the process. "This book provides information about how to rebuild a Ford Toploader transmission (1964-1987) and also discusses the Toploader's heir, the Jerico"-- Provided by publisher. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. In the early 1990s, Ford moved away from its decades-old small-block pushrod V-8 engine designs and introduced a new "modular" overhead-cam (OHC) V-8 engine, which was the 4.6L V-8. This design was used in all of Ford's V-8 applications--from F-150 trucks to Mustangs and Crown Victorias. After 20 years of the 4.6L engine, it was once again time for a major update, and the Coyote V-8 engine was introduced for the 2011 model year. While more evolutionary than revolutionary, displacement was increased from 4.6L to 5.0L, and every part of the engine was improved with modern technology. The Coyote engine is simply better and more powerful than its predecessors. Now, the Coyote engine is nearly 15 years old. While they are very durable engines, the older units have accumulated a significant number of miles and are starting to wear out. In Ford Coyote Engines: How to Rebuild, industry veteran Jim Smart takes you through all of the steps to return your Coyote engine to like-new condition. Heads, cams, the valvetrain, rotating assemblies, engine blocks, machining, break-in, and tuning are all covered. In addition, Smart provides an in-depth history of the four different Coyote engine generations and provides expert knowledge about planning your build, parts selection, and the engine math that is required to make the best rebuild decisions. Whether you want to do your own rebuild or farm it out to a professional (as an informed customer), this book provides all of the knowledge you need to return your Coyote engine to its former glory. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Rebuild your American Motors Corporation (AMC) V-8 engine with help and guidance from Don's Auto Parts & Machine Shop, which is located in Kenosha, Wisconsin, the home of American Motors!The AMC Gen II and Gen III V-8 family consists of 290-, 304-, 343-, 360-, 390-, and 401-ci engines. Manufactured in Kenosha, Wisconsin, these engines reside between the fenders of classic cars (such as the AMC Javelin, AMX, Gremlin, AMC Rebel Machine, Matador, and Rambler and SC/Rambler) as well as Jeep CJs and full-size Jeeps. If this is your first time rebuilding an AMC engine, this book contains detailed photos and instructions beginning with disassembling your engine and determining the machining that will be needed. All of the fine details about boring and honing, crankshaft grinding, balancing, cylinder head rebuilding, engine assembly, oil modifications, and performance upgrades are detailed with photos. Many of the specialized machining steps that are needed for a performance build that your local machine shop might not know about are included in this book. AMC V-8 Engines: Rebuild & Modify not only shows the steps of a rebuild in detail but also helps you determine what kind of build is right for your project. It will assist you in making the correct decisions on compression ratio, camshaft selection, and which performance parts are needed. Many engine replacement parts are getting hard to find, so this book reveals some of the aftermarket and restoration companies that specialize in remaking AMC engine parts. Items such as camshafts, forged pistons, connecting rods, and cylinder head manufacturers are covered. Get ready to rebuild your AMC V-8. We look forward to helping you along the way! "This book provides information on how to rebuild and modify AMC V-8 engines"-- Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. The Chevy big-block has been installed in millions of cars and trucks over the past 50 years, including Camaros, Chevelles, Corvettes, Impalas, and a multitude of trucks. Extracting maximum performance has been the pursuit of engine builders ever since this engine was new in 1964. As a follow-up title to his How to Build Max-Performance Chevy Big-Blocks on a Budget, master engine builder David Vizard takes big-block Chevy engine building to the next level and shows how to build these extreme high-performance engines without breaking the bank. It goes well beyond basic performance techniques and delves into exceptional detail on each component group of the engine. Vizard shows you how to build the ultimate big-blocks for the street: engines that are up to 850 hp on 91-octane pump gas, which is a monumental achievement.The Chevy big-block has been substantially under-valved, and the key to getting the best performance from this engine is to deal effectively with this design limitation. Vizard explains how to minimize intake-valve shrouding, reveals the science behind all cam-timing events, and explains how to arrive at the correct valve overlap for maximum efficiency. Vizard also covers the nuances of piston ports, rings, and connecting rods so that the rotating assembly is strong and working at its peak. Finally, a special section presents a number of max-performance big-block sample builds.This volume includes a huge range of cutting-edge aftermarket parts and advanced tuning techniques. If you're serious about building a max-performance Chevy big-block engine for the street or track, you owe it to your engine and yourself to include this book in your automotive library. Master engine builder David Vizard takes big-block Chevy engine building to the next level and shows how to build these extreme high-performance engines without breaking the bank. This book goes well beyond the basic performance techniques and delves into exceptional detail on each component group of the engine. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. From 2001 to 2009, General Motors Corporation produced the powerful 8.1L Vortec/496 CID engine for trucks, boats, and more. From factory engines to aftermarket manufacture, Larry Hofer and Don Taylor cover the ins and outs of increasing horsepower and modifying torque for increased performance to suit your needs. This is the only book written about the 8.1L Vortec/496 CID engine. For every use you can think of, there is a different way to configure this engine. This book covers the block, oiling systems, cooling systems, cranks, rods and pistons, cylinder heads, computers, exhausts, and everything you want to know to select the right combination of components. Whether you're a truck or boat owner looking to modify an existing engine or a mechanic wanting to expand your knowledge of Chevy blocks, Chevrolet 8.1 L Vortec/496 Performance Manual has the information you need. Full-color photographs and additional sections and tips highlight options for advanced modifications. You won't be disappointed! Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Everyone wants a great-looking paint job on his or her car, but it's not cheap. Since most of the expense of a custom paint job is labor, learning to do the work yourself using tips from the pros can save you money.Veteran author Dennis W. Parks joined body shop owner and TV personality Rick Bacon with Custom Car Painting on a Budget to show you how to paint your car. With the knowledge provided in this book and your willingness to learn, you can be driving a car with a custom paint job of which you can be proud. Step-by-step photos and easy-to-follow directions cover everything from paint removal and disassembly to final reassembly. This book includes chapters on ways to reduce cost, perform minor bodywork, strip old paint, install patch panels, do surface preparation, mask, paint, and maintain the finish.Bodywork, surface preparation, and buffing are all labor-intensive tasks that quickly add up at the local paint shop. With the knowledge provided in this book and your willingness to learn, you can be driving a car with a custom paint job that you can be proud of. Get professional results at a fraction of the cost with Custom Car Painting on a Budget. "This book provides insight on planning a realistic budget, what materials are needed, and how to do the work required to paint your custom car"-- Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. The VW Beetle (officially the Volkswagen Type 1) needs no introduction. Manufactured and marketed globally by Volkswagen from 1938 to 2003, more than 21 million were produced and sold around the world. The car was extremely popular in the US and Europe during the 1950s and 1960s. However, increasing competition from Japanese, American, and European manufacturers as well as stiffening demands for better safety and emissions contributed to a sharp decline in sales in the early 1970s. The Beetle was manufactured in much smaller numbers in Germany until the late 1970s, when production shifted to Brazil and Mexico, where operating cost was a large factor in keeping the Beetle alive. While simple and fun, the Beetle had simply become outdated. Of course, the enthusiast market did not see it that way. Aficionados loved the simplicity in the design as well as its aesthetics, and they enjoyed tinkering with the mechanicals of their Beetles, Buses, Type 3 models, and Karmann Ghias. There was (and still is) no shortage of options when customizing your Beetle, and for many, extracting as much performance out of the air-cooled flat-4 was the way to go. Not only does it remedy the issue of keeping up with modern traffic but Beetles also respond really well to modifications and have a robust aftermarket to support them. In VW Air-Cooled Engines: How to Build Max Performance, VW veteran Dr. John F. Kershaw lays the groundwork for getting the most possible power for your desired use and application. Covered here are all the various power levels and components. This includes rotating assemblies, cylinder heads, the cams and valvetrain, engine blocks, ignitions systems, fuel injection, carburetors and induction, exhaust, sources for parts, and even turbos and superchargers. Are you looking for just a little more power to keep up with traffic or maybe a streetable high-performance machine? Perhaps you are interested in a little street/strip action or even all-out racing applications. All of your options are examined in this book. Add it to your air-cooled library today. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Discover the best factory and aftermarket parts combinations for your Chevy small-block engine using this well-researched data that will save you time and energy.In this revised edition of Chevrolet Small-Block Parts Interchange Manual, Chevrolet expert and author Ed Staffel delivers detailed interchange information on cranks, rods, pistons, cylinder heads, intake manifolds, exhaust manifolds, ignitions, carburetors, and more. Casting and serial number identification guides are included to help you through the myriad of available parts in salvage yards, at swap meets, and on the internet. Learn what parts can be combined to create various displacements, which parts match well with others, where factory parts are best, and where the aftermarket offers a better alternative. Solid information on performance modifications is included where applicable.The first and second generations of small-block Chevy engines have been around for more than 60 years, and a byproduct of the design's extremely long production run is the confusing array of configurations that this engine family has seen. Staffel delivers this revised edition on everything you need to know about parts interchangeability for the small-block Chevy. Build your Chevy on a budget today!Whether you're building a Chevy small-block salvage-yard stroker engine, looking to make a numbers-matching engine, saving money on repurposing factory parts, or simply looking to see which parts work together, this book is a must-have addition to your library. "This revised edition provides information on available aftermarket Chevrolet Small-Block parts and changes to them since the 2010 publication."--Provided by publisher. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Get your hot rod back on the road by rebuilding its Ford Flathead engine using this comprehensive guide that features expert advice and detailed step-by-step sequences.In Ford Flathead Engines: How to Rebuild & Modify, veteran author Tony Thacker and flathead guru of H&H Flatheads, Mike Herman, take you through rebuilding a flathead. One of the most important steps is to actually find a good, usable core; many have been sitting for a very long time and the engine design is prone to cracking. Running changes are also an important consideration when selecting a core and include the cooling system, ignition, and transmission mount. After you have selected a core, Thacker and Herman take you through the entire process of a rebuild, including teardown, parts inspection, machine shop processes, replacement part selection, reassembly, start up, and break-in. Although not the first V-8 engine ever produced, Henry Ford's side-valve V-8, launched in 1932, certainly qualified as the first mass-produced V-8 sold to the public. Because of Henry Ford's stubbornness, the first versions were less than ideal. The technology was in its infancy, and cost-cutting measures limited the output and reliability of the early models. Over time, however, the "Flattie" became the go-to powerplant for a whole generation of new hobbyists who were called "hot rodders." The engine maintained its position in the hobby well into the 1950s, even when more modern overhead-valve designs started coming out of Detroit. It's hard to overstate the impact that this simple little engine had on a whole generation of enthusiasts. Even today, people choose a flathead for period-correct builds over far more powerful options. The style and sound of a modified flathead is an iconic part of American history.Also covered is a unique performance build completed at the H&H shop for legendary race car team manager and all-around enthusiast Ray Evernham. It all adds up to a must-have book with more than 500 color photos and insider tips on building what could be called the most iconic engine ever built: the Ford flathead V-8. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. The Ford 8.8- and 9-inch rear differentials are two of the most popular and best-performing differentials on the market. While the 8.8-inch differential is commonly used in late-model Mustangs, the 9-inch is the more popular and arguably the most dominant high-performance differential for muscle cars, hot rods, custom vehicles, and race cars. Built from 1957 to 1986, the 9-inch Ford differential is used in a huge range of high-performance Ford and non-Ford vehicles because of its rugged construction, easy-to-set-up design, and large aftermarket support. The 9-inch differential effectively transmits power to the ground for many classic Fords and hot rods of all types, but it is the choice of many GM muscle car owners and racers as well. These differentials have been used extensively and proven their mettle in racing and high-performance applications. The Ford 8.8- and 9-inch must be rebuilt after extensive use and need a variety of different ratios for top performance and special applications. This Workbench book provides detailed step-by-step photos and information for rebuilding the differentials with the best equipment, installing the gear sets, and converting to Traction-Lok for a variety of applications. It describes how to disassemble the rear end, identify worn ring and pinion gears, other damage or wear, and shows step-by-step rebuilding of the differential. It also explains how to select the right differential hardware, bearings, seals, and other parts, as well as how to set ring and pinion backlash so that the rear end operates at peak efficiency. Aftermarket 9-inch performance differentials from manufacturers including Currie, Moser and Strange are reviewed and you learn how to rebuild and set up these high-performance aftermarket differentials. In addition, this book provides a comprehensive identification chart to ensure readers properly identify the model and specifics of the 9-inch differential. Chapters include axle identification, inspection, and purchasing axles for rebuilding; differential tear down; ring and pinion gear removal; inspection and reassembly; drive axle choices; and more. This Workbench book provides detailed step-by-step information for rebuilding the Ford 8.8- and 9-inch rear differentials, two of the most popular and best performing differentials on the market. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Although not quite the heavy-duty performer as its big brother, the Turbo 400, the Turbo 350 transmission is a fine, durable, capable, and when modified, stout performer in its own right. Millions of GM cars and trucks have been built with Turbo 350 automatic transmissions. There always comes a time when the old transmission shows signs of wear. At some point, even the best transmissions need to be rebuilt. In GM Turbo 350 Transmissions: How to Rebuild & Modify, respected automotive technical author Cliff Ruggles guides you through the complex rebuild procedure of GM's popular rear-wheel-drive automatic transmission. With his proven style, Ruggles goes through the step-by-step rebuild and performance upgrade procedures in a series of full-color photos. He includes instruction on removal and installation, tear-down procedures, parts inspection and replacement, as well as performance mods and shift kit installation. Time-saving tips are part of every buildup as well. Automatic transmissions are a mystery to most. Even if you end up deciding to have a professional take care of your transmission repair and performance needs, the information contained in this book is crucial to understanding how the power gets from the engine to the road. Add a copy of GM Turbo 350 Transmissions: How to Rebuild & Modify to your automotive library today. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. The small-block Chevrolet is easily the most popular V-8 engine ever built. It was introduced in 1955, and remained in production until the mid-1990s, powering legendary cars such as the 1955-1957 Chevys, Camaros, Impalas, Novas, Chevelles, and of course, the most popular sports car of all time, the Corvette. Of course, whether restoring or modifying one of these classics, the time comes when your small-block Chevy needs rebuilding. This updated version of Small-Block Chevrolet: Stock and High-Performance Rebuilds is a quality, step-by-step Workbench book that shows you how to rebuild a street or racing small-block Chevy in your own garage. It includes more than 600 color photos and easy-to-read text that explains every procedure a professional builder uses to assemble an engine, from crankshaft to carburetor. Detailed sections show how to disassemble a used engine, inspect for signs of damage, select replacement parts, buy machine work, check critical component fit, and much more! Performance mods and upgrades are discussed along the way, so the book meets the needs of all enthusiasts, from restorers to hot rodders. Small Block Chevrolet: Stock and High-Performance Rebuilds is a must-have for every small-block Chevy fan. Stock and HighPerformanceRebuilds. The small-block Chevrolet is easily the most popular V8 engine ever built Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Introduced in 1997, the GM LS engine has become the dominant V-8 engine in GM vehicles and a top-selling high-performance crate engine. GM has released a wide range of Gen III and IV LS engines that deliver spectacular efficiency and performance. These compact, lightweight, cutting-edge pushrod V-8 engines have become affordable and readily obtainable from a variety of sources. In the process, the LS engine has become the most popular V-8 engine to swap into many American and foreign muscle cars, sports cars, trucks, and passenger cars. To select the best engine for an LS engine swap, you need to carefully consider the application. Veteran author and LS engine swap master Jefferson Bryant reveals all the criteria to consider when choosing an LS engine for a swap project. You are guided through selecting or fabricating motor mounts for the project. Positioning the LS engine in the engine compartment and packaging its equipment is a crucial part of the swap process; it is comprehensively covered. As part of the installation, you need to choose a transmission crossmember that fits the engine and vehicle as well as selecting an oil pan with adequate ground clearance that has the correct profile for the crossmember. Often the brake booster, steering shaft, accessory pulleys, and the exhaust system present clearance challenges, so this book offers the best options and solutions. In addition, adapting the computer-control system to the wiring harness and vehicle is a crucial aspect for completing the installation, and is thoroughly detailed. As an all-new edition of the original top-selling title, LS Swaps: How to Swap GM LS Engines into Almost Anything covers the right way to do a spectrum of swaps. So, pick up this guide, select your ride, and get started on your next exciting project. As an all-new edition of the original top-selling title, LS Swaps: How to Swap GM LS Engines into Almost Anything covers the right way to do a spectrum of swaps. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Porting heads is an art and science. It takes a craftsman's touch to shape the surfaces of the head for the optimal flow characteristics and the best performance. Porting demands the right tools, skills, and application of knowledge. Few other engine builders have the same level of knowledge and skill porting engine heads as David Vizard. All the aspects of porting stock as well as aftermarket heads in aluminum and cast-iron constructions are covered. Vizard goes into great depth and detail on porting aftermarket heads. Starting with the basic techniques up to more advanced techniques, you are shown how to port iron and aluminum heads as well as benefits of hand and CNC porting. You are also shown how to build a high-quality flow bench at home so you can test your work and obtain professional results. Vizard shows how to optimize flow paths through the heads, past the valves, and into the combustion chamber. The book covers blending the bowls, a basic porting procedure, and also covers pocket porting, porting the intake runners, and many advanced procedures. These advanced procedures include unshrouding valves, porting a shortside turn from the floor of the port down toward the valve seat, and developing the ideal port area and angle. All of these changes combine to produce optimal flow velocity through the engine for maximum power. Author Vizard explains how the enthusiast needs to shape the combustion chambers and smooth out ports for maximum performance. Of key importance, he shows how to optimize flow paths through the heads, past the valves, and into the combustion chamber. It covers blending the bowls, a most basic porting procedure, but it also covers pocket porting, porting the intake runners, and many advanced procedures. These advanced procedures include unshrouding valves, porting a shortside turn from the floor of the port down toward the valve seat, and developing the ideal port area and angle. All of these changes combine to produce optimal flow velocity through the engine for the maximum power. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. The Ford C4 and C6 automatic transmissions have been equipped in millions of production rear-wheel drive cars and trucks since they were introduced in the 1960s (C4 in 1964, C6 in 1966). They remained in production deep into the 1980s, when overdrive-equipped transmissions finally eclipsed them. However, the C4 and C6 remain incredibly popular with enthusiasts, racers, and restorers alike due to their simplicity, strength, and low cost. Rebuilding either of these transmissions isn't overly difficult, but does require care, some specialized tools, and proper procedure to be followed closely. In How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions, author George Reid walks readers through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing. In addition, if the transmission will be used in a high-performance or competition situation, the author includes the various steps required to bolster the unit's strength, using commonly available aftermarket components. Each chapter contains special notes, sidebars, and technical tips to assist the reader at every step in the process. Some refer to safety, others to time-saving advice, and others to small modifications that may aid long-term durability or help the builder tailor the shift firmness. The author's extensive research and experience with these popular transmissions has resulted in a well-rounded full-color technical guide to their revitalization. In How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions, author George Reid walks readers through the process step-by-step, from removing the transmission, to complete overhaul, to proper re-installation and road testing. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Often, wiring and electrical work intimidate automotive do-it-yourselfers more than anything else. It's not mechanical, and therefore, it's unfamiliar territory. Electrons are invisible, and to an untrained enthusiast they can do unpredictable things. Finally, here is an enthusiast's guide that takes the mysteries and misunderstandings out of automotive electrical design, modification, diagnostics, and repair. Automotive Wiring and Electrical Systems is the perfect book to unshroud the mysteries of automotive electrics and electronic systems. The basics of electrical principles, including voltage, amperage, resistance, and Ohm's law, are revealed in clear and concise detail so the enthusiast understands what these mean in the construction and repair of automotive electrical circuits. All the tools and the proper equipment required for automotive electrical tasks are covered. In addition, this in-depth guide explains how to perform more complex tasks, such as adding new circuits, installing aftermarket electronics, repairing existing circuits, and troubleshooting. It also explains how to complete popular wiring projects, such as adding late-model electronic accessories and convenience items to earlier-model cars, installing relay systems, designing and assembling multi-function circuits and harnesses, and much more. With this book in hand, you will be able to assemble, design, and build single- and multi-function circuits and harnesses, troubleshoot and repair existing circuits, and install aftermarket systems and electronics. Automotive Wiring and Electrical Systems is the perfect book for wiring a hot rod from scratch, modifying muscle car electrical circuits for cooling fans and/or power windows, or adding a big stereo and other conveniences to modern performance cars. With this book in hand, you will be able to assemble, design, and build single and multi-function circuits and harnesses, troubleshoot and repair existing circuits, and install aftermarket systems and electronics. Automotive Wiring and Electrical Systems is the perfect book for wiring a hot rod from scratch, modifying muscle car electrical circuits for cooling fans and or power windows, or adding a big stereo and other conveniences to modern performance cars. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Whether you are an owner, potential buyer, restorer, or Mopar enthusiast of this era, this book will provide you with startling new insight on the 1970 Plymouth Superbird.Use this resource to examine the 1970 Plymouth Superbird from nose cone to rear wing, review the factory options, and relive its glory days with Richard Petty and Pete Hamilton behind the wheel. "Petty signs with Ford!" Those four words tore through the racing world like a hot knife through butter while loyalists threw their hands up in disbelief. King Richard's defection was in part because Plymouth hadn't built a Dodge Daytona counterpart for the NASCAR circuit, in addition to the fact that Petty Enterprises wanted to be the sole racing parts distributor for Plymouth at the time. Plymouth weathered the backlash publicly while privately scurrying to create a car to lure Richard back to Plymouth. That car? The 1970 Plymouth Superbird.Production models languished on salesroom floors due in part to NASCAR having increased the homologation requirement from 500 units to 2,000. These cars were highly specialized, seen as being in excess in proportion to the hottest street cars of the period. Fast-forward to today, Superbirds are highly collectible and are a star attraction at car shows and auctions, pulling top dollar and generating real excitement. What a difference a few decades makes!Each volume in the In Detail series provides an introduction and historical overview, an explanation of the design and concepts involved in creating the car, a look at marketing and promotion, an in-depth study of all hardware and available options, and an examination of where the care is on the market today. Also included are paint and option codes, VIN and build-tag decoders, as well as production numbers. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Get valuable advice on how to restore your vintage Mustang!Production of the Ford Mustang, America's most popular pony car, has been uninterrupted for more than 55 years. The popularity of the Mustang is what led to the pony-car class. The first generation of cars, from 1964-1/2 to 1973, is arguably the most beloved generation, selling more than a million cars in the first two years of production. They were sporty, affordable, and available with a wide variety of options to please a wide variety of customers.First-generation Mustangs are still very popular. They are plentiful and can be found at various price points and in various levels of condition for any potential restorer to acquire. There is an extremely robust aftermarket, so parts availability is never an issue. Mustang expert and author Dave Stribling shares his expertise in this restorer's guide, covering all of the essential topics. The basics of acquiring a car, determining the restoration level that is desired, and the tools necessary for the job are included. Disassembly, prep for paint and body and reassembly are covered. Also, the suspension and braking systems, the engine and driveline, and the electrical and interior components are examined. This book is an ideal starting point that features a lot of great advice about how to achieve what you want from your restoration and the best path to get there. Whether you want to tackle all of the work yourself or you just want to be informed when hiring a professional to do the work for you, this book is a valuable addition to your Mustang library. "This book provides information on how to restore a first-generation Ford Mustang from 1964-1/2 to 1973"-- Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Paperback. Condición: new. Paperback. Learn the entire fascinating story of the American Hot Rod Association (AHRA) in this wonderfully illustrated color history. When the National Hot Rod Association (NHRA) was formed in 1951 by Wally Parks, the reasoning for the formation was to "create order from chaos" by instituting safety rules and performance standards that helped legitimize the sport of drag racing. Some organization was certainly necessary. A postwar boom in automotive enthusiasm was reaching new heights, and Hot Rod magazine and the NHRA were right in the thick of it. The NHRA hosted its first drag racing event in 1953, and in 1955, the organization staged its first national event, which was simply called "The Nationals." The AHRA formed in 1956 as an alternative to the NHRA, where the drivers voted on the rules (rather than sanctioning bodies and tracks), and their influence on the sport was felt almost immediately. When the NHRA denied the use of nitromethane in 1957, the AHRA approved it. When the NHRA banned aircraft-powered dragsters in 1961, the AHRA welcomed them. When the NHRA said no to the emerging Funny Car in 1965, the AHRA said yes. When fans and racers screamed for a heads-up Super Stock category in 1968, the AHRA delivered. The AHRA was called a rebel association. Some say that it was more of an association that got things done--to the delight of fans and racers. The AHRA was on equal ground with the NHRA by the 1970s, drawing enormous crowds and racer entries. In this fascinating history, veteran author Doug Boyce tells the story of the AHRA: the rise, the competition, the events, and the eventual downfall of the organization. After AHRA President Jim Tice passed away in 1982, internal fighting for control of the association resulted in its doom. Get the whole story here, and add this wonderful volume to your drag racing library. "This book provides information on how a rebel drag racing association called the American Hot Rod Association (AHRA) changed quarter-mile competition"-- Shipping may be from multiple locations in the US or from the UK, depending on stock availability.