Fifth National Conference on Rapid Design, Prototyping and Manufacture
Jacobson, David (EDT); Rennie, Allan (EDT); Bocking, Chris (EDT)
ISBN 10: 1860584659 ISBN 13: 9781860584657
Editorial: Wiley, 2004
Nuevos
Encuadernación de tapa dura
Librería:
GreatBookPricesUK, Woodford Green, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Vendedor de AbeBooks desde 28 de enero de 2020
Este artículo en concreto ya no está disponible.
Descripción
Descripción:
N° de ref. del artículo 3339931-n
Sinopsis:
Rapid Prototyping and allied fields are still relatively young technologies and, as such, their scope and range are expanding at a dramatic rate. New and improved techniques and applicationsare developing and this is reflected in the varied topics covered in Rapid Design, Prototyping and Manufacture.
Efforts to extend the scope of application of three dimensional printing processes is an important milestone in rapid manufacture. This is being vigorously addressed and is well represented in this volume. It now seems to be only a matter of time before three-dimensional printing units will join other peripherals in office and domestic computer systems to produce toys, small domestic and office items on demand.
CONTENTS INCLUDE:
- Analysis of the application of the Z-corps three dimensional printing system for rapid tooling for plastic injection moulded components.
- A novel method for rapid prototyping/tooling/manufacture - Shell/Assisted Layer Manufacture (SALM)
- Accuracy of a novel fused deposition modelling technology
- New software tools for reverse engineering parts based on three-dimensional volumetric scans.
- A stuctured approach to the simplification of optimization problems in the virtual prototyping environment
- The appropriate application of computer-aided design and manufacture techniques in silicone facial prosthetics
- Application of the Z-Corps three-dimensional printing processes using novel material to manufacture bio-scaffold for bone replacement
- Rapid prototyping manufacture of complex three-dimensional microscaffolds used in regenerative medicine.
Acerca del autor:
David Jacobson was born in South Africa. He teaches in the Department of Sociology at Arizona State University. He received his PhD from Princeton University and studied at the Hebrew University of Jerusalem and the London School of Economics. His other books include Right Across Borders and Old Nations, New World. Allan Rennie was born in Stirling, brought up in Kilsyth and lives in Dunblane with his wife Margaret, a children's library assistant. From 1979 he worked on local newspapers including the Bishopbriggs Times, Clydebank Post and Stirling Observer, before joining The Sun as a sub-editor in 1987.
"Sobre este título" puede pertenecer a otra edición de este libro.
Detalles bibliográficos
Título: Fifth National Conference on Rapid Design, ...
Editorial: Wiley
Año de publicación: 2004
Encuadernación: Encuadernación de tapa dura
Condición: New
Los mejores resultados en AbeBooks
Imagen de archivo
Fifth National Conference on Rapid Design, Prototyping and Manufacture
Librería: Anybook.com, Lincoln, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,450grams, ISBN:9781860584657. Nº de ref. del artículo: 9855325
Comprar usado
EUR 15,45
Envío por EUR 15,40
Se envía de Reino Unido a Estados Unidos de America
Se envía de Reino Unido a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Fifth National Conference on Rapid Design, Prototyping and Manufacture (Hardcover)
Publicado por
John Wiley & Sons Inc, New York, 2004
ISBN 10: 1860584659
ISBN 13: 9781860584657
Nuevo
Tapa dura
Original o primera edición
Librería: CitiRetail, Stevenage, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: new. Hardcover. Rapid Prototyping and allied fields are still relatively young technologies and, as such, their scope and range are expanding at a dramatic rate. New and improved techniques and applicationsare developing and this is reflected in the varied topics covered in Rapid Design, Prototyping and Manufacture. Efforts to extend the scope of application of three dimensional printing processes is an important milestone in rapid manufacture. This is being vigorously addressed and is well represented in this volume. It now seems to be only a matter of time before three-dimensional printing units will join other peripherals in office and domestic computer systems to produce toys, small domestic and office items on demand. CONTENTS INCLUDE: Analysis of the application of the Z-corps three dimensional printing system for rapid tooling for plastic injection moulded components.A novel method for rapid prototyping/tooling/manufacture - Shell/Assisted Layer Manufacture (SALM)Accuracy of a novel fused deposition modelling technologyNew software tools for reverse engineering parts based on three-dimensional volumetric scans.A stuctured approach to the simplification of optimization problems in the virtual prototyping environmentThe appropriate application of computer-aided design and manufacture techniques in silicone facial prostheticsApplication of the Z-Corps three-dimensional printing processes using novel material to manufacture bio-scaffold for bone replacementRapid prototyping manufacture of complex three-dimensional microscaffolds used in regenerative medicine. Efforts to extend the scope of application of three dimensional printing processes is an important milestone in rapid manufacture. This book includes analysis of the application of the Z corps three dimensional printing system for rapid tooling for plastic injection moulded components. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability. Nº de ref. del artículo: 9781860584657
Comprar nuevo
EUR 220,80
Envío por EUR 42,53
Se envía de Reino Unido a Estados Unidos de America
Se envía de Reino Unido a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Fifth National Conference on Rapid Design, Prototyping and Manufacture (Hardcover)
Publicado por
John Wiley & Sons Inc, New York, 2004
ISBN 10: 1860584659
ISBN 13: 9781860584657
Nuevo
Tapa dura
Original o primera edición
Librería: Grand Eagle Retail, Bensenville, IL, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: new. Hardcover. Rapid Prototyping and allied fields are still relatively young technologies and, as such, their scope and range are expanding at a dramatic rate. New and improved techniques and applicationsare developing and this is reflected in the varied topics covered in Rapid Design, Prototyping and Manufacture. Efforts to extend the scope of application of three dimensional printing processes is an important milestone in rapid manufacture. This is being vigorously addressed and is well represented in this volume. It now seems to be only a matter of time before three-dimensional printing units will join other peripherals in office and domestic computer systems to produce toys, small domestic and office items on demand. CONTENTS INCLUDE: Analysis of the application of the Z-corps three dimensional printing system for rapid tooling for plastic injection moulded components.A novel method for rapid prototyping/tooling/manufacture - Shell/Assisted Layer Manufacture (SALM)Accuracy of a novel fused deposition modelling technologyNew software tools for reverse engineering parts based on three-dimensional volumetric scans.A stuctured approach to the simplification of optimization problems in the virtual prototyping environmentThe appropriate application of computer-aided design and manufacture techniques in silicone facial prostheticsApplication of the Z-Corps three-dimensional printing processes using novel material to manufacture bio-scaffold for bone replacementRapid prototyping manufacture of complex three-dimensional microscaffolds used in regenerative medicine. Efforts to extend the scope of application of three dimensional printing processes is an important milestone in rapid manufacture. This book includes analysis of the application of the Z corps three dimensional printing system for rapid tooling for plastic injection moulded components. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Nº de ref. del artículo: 9781860584657
Comprar nuevo
EUR 241,30
Gastos de envío gratis
Se envía dentro de Estados Unidos de America
Se envía dentro de Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Fifth National Conference on Rapid Design, Prototyping and Manufacture
Publicado por
John Wiley and Sons Ltd, 2004
ISBN 10: 1860584659
ISBN 13: 9781860584657
Nuevo
Tapa dura
Original o primera edición
Librería: Kennys Bookshop and Art Galleries Ltd., Galway, GY, Irlanda
Calificación del vendedor: 5 de 5 estrellas
Condición: New. Efforts to extend the scope of application of three dimensional printing processes is an important milestone in rapid manufacture. This book includes analysis of the application of the Z corps three dimensional printing system for rapid tooling for plastic injection moulded components. Editor(s): Jacobson, David; Rennie, Allan; Bocking, Chris. Num Pages: 112 pages, Ill. BIC Classification: TBC. Category: (P) Professional & Vocational. Dimension: 242 x 165 x 12. Weight in Grams: 382. . 2004. 1st Edition. Hardcover. . . . . Nº de ref. del artículo: V9781860584657
Comprar nuevo
EUR 263,41
Envío por EUR 10,50
Se envía de Irlanda a Estados Unidos de America
Se envía de Irlanda a Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Fifth National Conference on Rapid Design, Prototyping and Manufacture
Publicado por
John Wiley and Sons Ltd, 2004
ISBN 10: 1860584659
ISBN 13: 9781860584657
Nuevo
Tapa dura
Librería: Kennys Bookstore, Olney, MD, Estados Unidos de America
Calificación del vendedor: 4 de 5 estrellas
Condición: New. Efforts to extend the scope of application of three dimensional printing processes is an important milestone in rapid manufacture. This book includes analysis of the application of the Z corps three dimensional printing system for rapid tooling for plastic injection moulded components. Editor(s): Jacobson, David; Rennie, Allan; Bocking, Chris. Num Pages: 112 pages, Ill. BIC Classification: TBC. Category: (P) Professional & Vocational. Dimension: 242 x 165 x 12. Weight in Grams: 382. . 2004. 1st Edition. Hardcover. . . . . Books ship from the US and Ireland. Nº de ref. del artículo: V9781860584657
Comprar nuevo
EUR 328,08
Envío por EUR 9,00
Se envía dentro de Estados Unidos de America
Se envía dentro de Estados Unidos de America
Cantidad disponible: 1 disponibles
Imagen de archivo
Fifth National Conference on Rapid Design, Prototyping and Manufacture (Hardcover)
Publicado por
John Wiley & Sons Inc, New York, 2004
ISBN 10: 1860584659
ISBN 13: 9781860584657
Nuevo
Tapa dura
Original o primera edición
Librería: AussieBookSeller, Truganina, VIC, Australia
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: new. Hardcover. Rapid Prototyping and allied fields are still relatively young technologies and, as such, their scope and range are expanding at a dramatic rate. New and improved techniques and applicationsare developing and this is reflected in the varied topics covered in Rapid Design, Prototyping and Manufacture. Efforts to extend the scope of application of three dimensional printing processes is an important milestone in rapid manufacture. This is being vigorously addressed and is well represented in this volume. It now seems to be only a matter of time before three-dimensional printing units will join other peripherals in office and domestic computer systems to produce toys, small domestic and office items on demand. CONTENTS INCLUDE: Analysis of the application of the Z-corps three dimensional printing system for rapid tooling for plastic injection moulded components.A novel method for rapid prototyping/tooling/manufacture - Shell/Assisted Layer Manufacture (SALM)Accuracy of a novel fused deposition modelling technologyNew software tools for reverse engineering parts based on three-dimensional volumetric scans.A stuctured approach to the simplification of optimization problems in the virtual prototyping environmentThe appropriate application of computer-aided design and manufacture techniques in silicone facial prostheticsApplication of the Z-Corps three-dimensional printing processes using novel material to manufacture bio-scaffold for bone replacementRapid prototyping manufacture of complex three-dimensional microscaffolds used in regenerative medicine. Efforts to extend the scope of application of three dimensional printing processes is an important milestone in rapid manufacture. This book includes analysis of the application of the Z corps three dimensional printing system for rapid tooling for plastic injection moulded components. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability. Nº de ref. del artículo: 9781860584657
Comprar nuevo
EUR 333,40
Envío por EUR 31,70
Se envía de Australia a Estados Unidos de America
Se envía de Australia a Estados Unidos de America
Cantidad disponible: 1 disponibles