Imagen del editor

Embedded Systems Interfacing for Engineers Using the Freescale Hcs08 Microcontroller II: Digital and Analog Hardware Interfacing

Douglas Summerville

0 valoraciones por Goodreads
ISBN 10: 1608450082 / ISBN 13: 9781608450084
Editorial: Morgan & Claypool
Nuevos Condición: New Encuadernación de tapa blanda
Comprar nuevo
Precio recomendado: 40.00
Precio: EUR 36,71 Convertir moneda
Gastos de envío: EUR 3,31 A Estados Unidos de America Destinos, gastos y plazos de envío
Añadir al carrito

Ofrecido por

BuySomeBooks
Las Vegas, NV, Estados Unidos de America

Valoración 5 estrellas

Librería en AbeBooks desde: 21 de mayo de 2012

Descripción

Paperback. 140 pages. Dimensions: 9.1in. x 7.3in. x 0.5in.The vast majority of computers in use today are encapsulated within other systems. In contrast to general-purpose computers that run an endless selection of software, these embedded computers are often programmed for a very specific, low-level and often mundane purpose. Low-end microcontrollers, costing as little as one dollar, are often employed by engineers in designs that utilize only a small fraction of the processing capability of the device because it is either more cost-effective than selecting an application-specific part or because programmability offers custom functionality not otherwise available. Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller is a two-part book intended to provide an introduction to hardware and software interfacing for engineers. Building from a comprehensive introduction of fundamental computing concepts, the book suitable for a first course in computer organization for electrical or computer engineering students with a minimal background in digital logic and programming. In addition, this book can be valuable as a reference for engineers new to the Freescale HCS08 family of microcontrollers. The HCS08 processor architecture used in the book is relatively simple to learn, powerful enough to apply towards a wide-range of interfacing tasks, and accommodates breadboard prototyping in a laboratory using freely available and low-cost tools. In Part II: Digital and Analog Hardware Interfacing, hardware and software interfacing concepts are introduced. The emphasis of this work is on good hardware and software engineering design principles. Device drivers are developed illustrating the use of general-purpose and special-purpose digital IO interfaces, analog interfaces, serial interfaces and real-time IO processing. The hardware side of each interface is described and electrical specifications and related issues are considered. The first part of the book provides the programming skills necessary to implement the software in this part. Table of Contents: Introduction to the MC9S08QG48 Hardware Analog Input Serial Communication Real-Time IO Processing This item ships from multiple locations. Your book may arrive from Roseburg,OR, La Vergne,TN. N° de ref. de la librería 9781608450084

Cantidad: > 20

Hacer una pregunta a la librería

Detalles bibliográficos

Título: Embedded Systems Interfacing for Engineers ...

Editorial: Morgan & Claypool

Encuadernación: Paperback

Condición del libro: New

Tipo de libro: Paperback

Acerca de

Sinopsis:

The vast majority of computers in use today are encapsulated within other systems. In contrast to general-purpose computers that run an endless selection of software, these embedded computers are often programmed for a very specific, low-level and often mundane purpose. Low-end microcontrollers, costing as little as one dollar, are often employed by engineers in designs that utilize only a small fraction of the processing capability of the device because it is either more cost-effective than selecting an application-specific part or because programmability offers custom functionality not otherwise available. Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller is a two-part book intended to provide an introduction to hardware and software interfacing for engineers. Building from a comprehensive introduction of fundamental computing concepts, the book suitable for a first course in computer organization for electrical or computer engineering students with a minimal background in digital logic and programming. In addition, this book can be valuable as a reference for engineers new to the Freescale HCS08 family of microcontrollers. The HCS08 processor architecture used in the book is relatively simple to learn, powerful enough to apply towards a wide-range of interfacing tasks, and accommodates breadboard prototyping in a laboratory using freely available and low-cost tools. In Part II: Digital and Analog Hardware Interfacing, hardware and software interfacing concepts are introduced. The emphasis of this work is on good hardware and software engineering design principles. Device drivers are developed illustrating the use of general-purpose and special-purpose digital I/O interfaces, analog interfaces, serial interfaces and real-time I/O processing. The hardware side of each interface is described and electrical specifications and related issues are considered. The first part of the book provides the programming skills necessary to implement the software in this part. Table of Contents: Introduction to the MC9S08QG4/8 Hardware / Analog Input / Serial Communication / Real-Time I/O Processing

"Sobre este título" puede pertenecer a otra edición de este libro.

Descripción de la librería

BuySomeBooks is great place to get your books online. With over eight million titles available we're sure to have what you're looking for. Despite having a large selection of new books available for immediate shipment and excellent customer service, people still tell us they prefer us because of our prices.

Ver la página web de la librería

Condiciones de venta:

We guarantee the condition of every book as it's described on the Abebooks web
sites. If you're dissatisfied with your purchase (Incorrect Book/Not as
Described/Damaged) or if the order hasn't arrived, you're eligible for a refund
within 30 days of the estimated delivery date. If you've changed your mind about a book that you've ordered, please use the Ask bookseller a question link to contact us and we'll respond within 2 business days.

BuySomeBooks is operated by Drive-On-In, Inc., a Nevada co...

Más información
Condiciones de envío:

Orders usually ship within 1-2 business days. Books are shipped from multiple locations so your order may arrive from Las Vegas,NV, Roseburg,OR, La Vergne,TN, Momence,IL, or Commerce,GA.

Todos los libros de esta librería

Métodos de pago
aceptados por la librería

Visa Mastercard American Express Carte Bleue