Anaerobic Digestion Model No.1 (Adm1) (Scientific and Technical Report Series)

0 valoración promedio
( 0 valoraciones por Goodreads )
 
9781900222785: Anaerobic Digestion Model No.1 (Adm1) (Scientific and Technical Report Series)
Ver todas las copias de esta edición ISBN.
 
 

Book by Iwa Task Group for Mathematical Modeling Iwa Task

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor:

The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments.

"Sobre este título" puede pertenecer a otra edición de este libro.

Comprar nuevo Ver libro

Gastos de envío: EUR 4,41
De Reino Unido a Estados Unidos de America

Destinos, gastos y plazos de envío

Añadir al carrito

Los mejores resultados en AbeBooks

1.

Iwa Task Group for Mathematical Modeling
Publicado por IWA Publishing (2016)
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Paperback Cantidad disponible: 1
Impresión bajo demanda
Librería
Ria Christie Collections
(Uxbridge, Reino Unido)
Valoración
[?]

Descripción IWA Publishing, 2016. Paperback. Condición: New. PRINT ON DEMAND Book; New; Publication Year 2016; Not Signed; Fast Shipping from the UK. No. book. Nº de ref. del artículo: ria9781900222785_lsuk

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 91,50
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 4,41
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

2.

The IWA Task Group on Mathematics
Publicado por Iwa Publishing, United Kingdom (2008)
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Paperback Cantidad disponible: 10
Impresión bajo demanda
Librería
The Book Depository
(London, Reino Unido)
Valoración
[?]

Descripción Iwa Publishing, United Kingdom, 2008. Paperback. Condición: New. Language: English . Brand New Book ***** Print on Demand *****.The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific Technical Report No.13. Nº de ref. del artículo: AAV9781900222785

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 96,69
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

3.

The IWA Task Group on Mathematics
Publicado por Iwa Publishing, United Kingdom (2008)
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Paperback Cantidad disponible: 10
Impresión bajo demanda
Librería
Book Depository International
(London, Reino Unido)
Valoración
[?]

Descripción Iwa Publishing, United Kingdom, 2008. Paperback. Condición: New. Language: English . Brand New Book ***** Print on Demand *****. The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific Technical Report No.13. Nº de ref. del artículo: AAV9781900222785

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 99,27
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

4.

The IWA Task Group on Mathematics
Publicado por IWA Publishing (2002)
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Cantidad disponible: > 20
Impresión bajo demanda
Librería
Books2Anywhere
(Fairford, GLOS, Reino Unido)
Valoración
[?]

Descripción IWA Publishing, 2002. PAP. Condición: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Nº de ref. del artículo: LQ-9781900222785

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 92,02
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 10,27
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

5.

The IWA Task Group on Mathematics
Publicado por Iwa Publishing, United Kingdom (2008)
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Paperback Cantidad disponible: 10
Librería
Book Depository hard to find
(London, Reino Unido)
Valoración
[?]

Descripción Iwa Publishing, United Kingdom, 2008. Paperback. Condición: New. Language: English . This book usually ship within 10-15 business days and we will endeavor to dispatch orders quicker than this where possible. Brand New Book. The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific Technical Report No.13. Nº de ref. del artículo: LIE9781900222785

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 124,09
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

6.

Iwa Task Group for Mathematical Modeling; Task Group Iwa Task Group; Iwa Task Group
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Cantidad disponible: 5
Librería
ReadWhiz
(Portland, OR, Estados Unidos de America)
Valoración
[?]

Descripción Condición: New. Nº de ref. del artículo: ria9781900222785_ing

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 125,00
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío

7.

Iwa Task Group for Mathematical Modeling
Publicado por IWA Publishing (2018)
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Paperback Cantidad disponible: > 20
Impresión bajo demanda
Librería
Murray Media
(North Miami Beach, FL, Estados Unidos de America)
Valoración
[?]

Descripción IWA Publishing, 2018. Paperback. Condición: New. Never used! This item is printed on demand. Nº de ref. del artículo: 1900222787

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 131,15
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío

8.

Iwa Task Group for Mathematical Modeling; Task Group Iwa Task Group; Iwa Task Group
Publicado por IWA Publishing (2008)
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Tapa blanda Cantidad disponible: 1
Impresión bajo demanda
Librería
Valoración
[?]

Descripción IWA Publishing, 2008. Condición: New. This item is printed on demand for shipment within 3 working days. Nº de ref. del artículo: GM9781900222785

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 129,43
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 2,99
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío

9.

Iwa Task Group for Mathematical Modeling; Iwa Task Group, Task Group; Iwa Task Group
Publicado por IWA Publishing (2008)
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Paperback Cantidad disponible: 10
Librería
Ergodebooks
(RICHMOND, TX, Estados Unidos de America)
Valoración
[?]

Descripción IWA Publishing, 2008. Paperback. Condición: New. Nº de ref. del artículo: INGM9781900222785

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 139,86
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,44
A Estados Unidos de America
Destinos, gastos y plazos de envío

10.

IWA Task Group
Publicado por IWA Publishing (2008)
ISBN 10: 1900222787 ISBN 13: 9781900222785
Nuevo Paperback Cantidad disponible: 1
Librería
Ergodebooks
(RICHMOND, TX, Estados Unidos de America)
Valoración
[?]

Descripción IWA Publishing, 2008. Paperback. Condición: New. 1. Nº de ref. del artículo: DADAX1900222787

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 153,48
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,44
A Estados Unidos de America
Destinos, gastos y plazos de envío

Existen otras copia(s) de este libro

Ver todos los resultados de su búsqueda