Harold Hall Dividing (Workshop Practice)

ISBN 13: 9781854862389

Dividing (Workshop Practice)

3,8 valoración promedio
( 5 valoraciones por Goodreads )
 
9781854862389: Dividing (Workshop Practice)
Ver todas las copias de esta edición ISBN.
 
 

Book by Harold Hall

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor:

Faced with the prospect of machining a gear or gears for a project, many model engineers will be discouraged and will turn elsewhere for their next model. This need not be so, for the principles underlying gear cutting and many other aspects of engineering where an accurate division of circles is required are explained in depth in this book. Radial work on a metalworking lathe, such as the cutting of gearwheels or the drilling of holes on a set radius, calls for a method of precisely spacing the cuts. This skill is known as Dividing. The principles underlying this aspect of engineering are explained in depth in this book. It covers the subject of Dividing, dealing with the many methods that can be adopted: from simple applications without specialised equipment to the use of a semi-universal dividing head and a rotary table. The mathematical aspects of dividing are also covered but at a level that will be understood easily by a model engineer. Dividing equipment is relatively expensive, so two fully-detailed designs are included for dividing heads: a basic unit and the equivalent of a commercial semi-universal head.

Biografía del autor:

Harold Hall was for a number of years the editor of Model Engineers' Workshop magazine and through its pages, he established himself as a mentor to tyro model engineers worldwide. He is the author of seven books in the indispensable Workshop Practice Series and lives in the Hertfordshire countryside. Harold Hall commenced an industrial apprenticeship in 1950 at the age of sixteen and worked as an electrical control systems engineer for thirty-five years before becoming editor of Model Engineer's Workshop magazine in 1991. Following retirement in 1995, he has continued to contribute metalworking articles to almost every issue of the magazine published since then. His crafting hobbies extend beyond model engineering to cabinet making, modelling, marquetry and pencil sketching.

"Sobre este título" puede pertenecer a otra edición de este libro.

Comprar nuevo Ver libro

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America

Destinos, gastos y plazos de envío

Añadir al carrito

Los mejores resultados en AbeBooks

1.

Harold Hall
Publicado por Special Interest Model Books, United Kingdom (2005)
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Paperback Cantidad disponible: 10
Librería
The Book Depository
(London, Reino Unido)
Valoración
[?]

Descripción Special Interest Model Books, United Kingdom, 2005. Paperback. Condición: New. UK ed.. Language: English . Brand New Book. Faced with the prospect of machining a gear or gears for a project, many model engineers will be discouraged and will turn elsewhere for their next model. This need not be so, for the principles underlying gear cutting and many other aspects of engineering where an accurate division of circles is required are explained in depth in this book. Radial work on a metalworking lathe, such as the cutting of gearwheels or the drilling of holes on a set radius, calls for a method of precisely spacing the cuts. This skill is known as Dividing. The principles underlying this aspect of engineering are explained in depth in this book. It covers the subject of Dividing, dealing with the many methods that can be adopted: from simple applications without specialised equipment to the use of a semi-universal dividing head and a rotary table. The mathematical aspects of dividing are also covered but at a level that will be understood easily by a model engineer. Dividing equipment is relatively expensive, so two fully-detailed designs are included for dividing heads: a basic unit and the equivalent of a commercial semi-universal head. Nº de ref. del artículo: AAJ9781854862389

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 6,68
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

2.

Harold Hall
Publicado por Special Interest Model Books (2005)
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Paperback Cantidad disponible: > 20
Librería
The Monster Bookshop
(Fleckney, Reino Unido)
Valoración
[?]

Descripción Special Interest Model Books, 2005. Paperback. Condición: New. BRAND NEW ** SUPER FAST SHIPPING FROM UK WAREHOUSE ** 30 DAY MONEY BACK GUARANTEE. Nº de ref. del artículo: mon0000456497

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 8,04
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 2,26
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

3.

Harold Hall
Publicado por Special Interest Model Books, United Kingdom (2005)
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Paperback Cantidad disponible: 10
Librería
Book Depository International
(London, Reino Unido)
Valoración
[?]

Descripción Special Interest Model Books, United Kingdom, 2005. Paperback. Condición: New. UK ed.. Language: English . Brand New Book. Faced with the prospect of machining a gear or gears for a project, many model engineers will be discouraged and will turn elsewhere for their next model. This need not be so, for the principles underlying gear cutting and many other aspects of engineering where an accurate division of circles is required are explained in depth in this book. Radial work on a metalworking lathe, such as the cutting of gearwheels or the drilling of holes on a set radius, calls for a method of precisely spacing the cuts. This skill is known as Dividing. The principles underlying this aspect of engineering are explained in depth in this book. It covers the subject of Dividing, dealing with the many methods that can be adopted: from simple applications without specialised equipment to the use of a semi-universal dividing head and a rotary table. The mathematical aspects of dividing are also covered but at a level that will be understood easily by a model engineer. Dividing equipment is relatively expensive, so two fully-detailed designs are included for dividing heads: a basic unit and the equivalent of a commercial semi-universal head. Nº de ref. del artículo: AAJ9781854862389

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 10,55
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

4.

Harold Hall
Publicado por Workshop Practice (2005)
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Tapa blanda Cantidad disponible: 1
Librería
Valoración
[?]

Descripción Workshop Practice, 2005. Condición: New. Nº de ref. del artículo: EH9781854862389

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 7,73
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 2,99
De Alemania a Estados Unidos de America
Destinos, gastos y plazos de envío

5.

Harold Hall
Publicado por Special Interest Model Books 2005-05-12 (2005)
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Paperback Cantidad disponible: 2
Librería
Chiron Media
(Wallingford, Reino Unido)
Valoración
[?]

Descripción Special Interest Model Books 2005-05-12, 2005. Paperback. Condición: New. Nº de ref. del artículo: NU-BER-00300005

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 6,48
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 4,53
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

6.

Harold Hall
Publicado por Special Interest Model Books 2005-05-12 (2005)
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Cantidad disponible: 5
Librería
Chiron Media
(Wallingford, Reino Unido)
Valoración
[?]

Descripción Special Interest Model Books 2005-05-12, 2005. Condición: New. Brand new book, sourced directly from publisher. Dispatch time is 24-48 hours from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely. Nº de ref. del artículo: NU-GRD-00567127

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 6,61
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 4,53
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

7.

Hall, Harold
Publicado por Special Interest Model Books (2005)
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Tapa blanda Cantidad disponible: > 20
Librería
Valoración
[?]

Descripción Special Interest Model Books, 2005. Condición: New. 2005. Paperback. The principles underlying radial work on a metalworking lathe are explained in depth in this book. It covers the methods that can be adopted: from simple applications without specialised equipment to the use of a semi-universal dividing head and a rotary table. Series: Workshop Practice. Num Pages: 104 pages, 63 black and white photographs; 80 scale plans & line drawings. BIC Classification: WDH. Category: (G) General (US: Trade). Dimension: 218 x 148 x 7. Weight in Grams: 164. . . . . . . Nº de ref. del artículo: V9781854862389

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 11,24
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Irlanda a Estados Unidos de America
Destinos, gastos y plazos de envío

8.

Harold Hall
Publicado por Special Interest Model Books
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Paperback Cantidad disponible: 6
Librería
THE SAINT BOOKSTORE
(Southport, Reino Unido)
Valoración
[?]

Descripción Special Interest Model Books. Paperback. Condición: New. New copy - Usually dispatched within 2 working days. Nº de ref. del artículo: B9781854862389

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 3,48
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 7,88
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

9.

Hall, Harold
Publicado por Special Interest Model Books
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Tapa blanda Cantidad disponible: > 20
Librería
Kennys Bookstore
(Olney, MD, Estados Unidos de America)
Valoración
[?]

Descripción Special Interest Model Books. Condición: New. 2005. Paperback. The principles underlying radial work on a metalworking lathe are explained in depth in this book. It covers the methods that can be adopted: from simple applications without specialised equipment to the use of a semi-universal dividing head and a rotary table. Series: Workshop Practice. Num Pages: 104 pages, 63 black and white photographs; 80 scale plans & line drawings. BIC Classification: WDH. Category: (G) General (US: Trade). Dimension: 218 x 148 x 7. Weight in Grams: 164. . . . . . Books ship from the US and Ireland. Nº de ref. del artículo: V9781854862389

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 11,76
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío

10.

Harold Hall
ISBN 10: 1854862383 ISBN 13: 9781854862389
Nuevo Cantidad disponible: 3
Librería
Speedy Hen LLC
(Sunrise, FL, Estados Unidos de America)
Valoración
[?]

Descripción Condición: New. Bookseller Inventory # ST1854862383. Nº de ref. del artículo: ST1854862383

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 11,80
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío

Existen otras copia(s) de este libro

Ver todos los resultados de su búsqueda