Assembly Modeling With Solidworks 2012: For the Solidworks User Who Needs to Understand Assembly Modeling

 
9781585037087: Assembly Modeling With Solidworks 2012: For the Solidworks User Who Needs to Understand Assembly Modeling
Ver todas las copias de esta edición ISBN.
 
 

Book by David Planchard Marie Planchard

"Sinopsis" puede pertenecer a otra edición de este libro.

Reseña del editor:

Assembly Modeling with SolidWorks 2012 is written to assist the beginning SolidWorks user with a few months of design experience to the intermediate SolidWorks user who desires to enhance their skill sets in assembly modeling. The book provides a solid foundation in assembly modeling using competency-based projects. In step-by-step instructions, the book provides examples to:

  • Start a SolidWorks session and to understand the following interfaces: Menu bar toolbar, Menu bar menu, Drop-down menus, Context toolbars, Consolidated drop-down toolbars, System feedback icons, Confirmation Corner, Heads-up View toolbar, CommandManager, and more.
  • Set System Options and Document Properties as they applied to a part and assembly template. Create new SolidWorks folder locations: Document Templates, Reference Documents, and Design Library.
  • Download components from 3D ContentCentral and rename and save components using SolidWorks Explorer.
  • Apply the Bottom-up assembly approach with two levels of configurations using the Configure Component tool, the Configure Dimension tool, Design Tables, and the Add Configuration tool.
  • Create new parts based on component features utilizing the Bottom-up assembly approach.
  • Apply Standard Mates, SmartMates, and the Design Library Toolbox.
  • Apply the Top-down assembly approach with two levels of configurations with In-Context components.
  • Understand the following: Out-of-Context components, External References, InPlace Mates, redefining and replacing components and motion studies.
  • Apply the Derived Feature Component Pattern tool, Linear Component Pattern tool, and the Mirror Component tool along with the Explode Line Sketch tool.
  • Create a multi sheet, multi view assembly drawing. Knowledge of Custom Properties in a part/assembly and linked notes, with the ability to incorporate configurations of an Exploded view, Bill of Materials, Revision tables, and more.
  • Address the Layout-based assembly approach and Global Variables and Equations to control relationships.

Each chapter begins with the desired outcomes and usage competencies. Explore assembly modeling techniques through a series of design situations, industry scenarios, projects and objectives.

Chapter 9 provides a bonus section on the Certified SolidWorks Associate CSWA program with sample exam questions and initial and final SolidWorks models. Passing the CSWA exam proves to employers that you have the necessary fundamental engineering graphics and SolidWorks competencies.

The book is a self-paced tutorial in a realistic design setting. Complex models expose you to large assembly modeling techniques. You focus on the design process while learning the commands relative to assemblies.

To obtain the most from this text, you should be familiar with the SolidWorks User Interface or other parametric modeling software application. Your skill sets should include the ability to create simple parts, assemblies, and drawings and manipulate documents through the Windows operating system.

Table of Contents
Introduction
1. SolidWorks 2012 User Interface
2. File Management, System Options, Templates, SolidWorks Explorer, and more
3. Assembly Modeling - Bottom-up design approach
4. Bottom-Up design assembly approach - Two Levels of Configurations
5. Top-down design assembly approach - Two Components with Configurations
6. Part and Assembly Configurations, Custom Properties, Design Tables and References
7. Assembly Drawings with Revision Table and Bill of Materials
8. Top-down design, Layout Sketches, Block, Motion, and More
9. Certified SolidWorks Associate CSWA Exam
Appendix
Index

Biografía del autor:

David Planchard is the founder of D&M Education LLC. Before starting D&M Education, he spent over 27 years in industry and academia holding various engineering, marketing, and teaching positions and degrees. He holds five U.S. patents and one international patent. He has published and authored numerous papers on Machine Design, Product Design, Mechanics of Materials, and Solid Modeling. He is an active member of the SolidWorks Users Group and the American Society of Engineering Education (ASEE). David holds a BSME, MSM with the following Professional Certifications: CCAI, CCNA, CCNP, CSWA, and CSWP. David is a SolidWorks Solution Partner, an Adjunct Faculty member and the SAE advisor at Worcester Polytechnic Institute in the Mechanical Engineering department.

Marie Planchard is the Director of World Education Markets at DS SolidWorks Corp. Before she joined SolidWorks, Marie spent over 10 years as an engineering professor at Mass Bay College in Wellesley Hills, MA. She has 14 plus years of industry software experience and held a variety of management and engineering positions. Marie holds a BSME, MSME and a Certified SolidWorks Professional (CSWP) Certification. She is an active member of the American Society of Mechanical Engineers (ASME) and the American Society for Engineering Education (ASEE).

David and Marie Planchard are co-authors of the following books:

  • A Commands Guide for SolidWorks 2012, 2011, 2010, 2009 and 2008
  • Assembly Modeling with SolidWorks 2012, 2010, 2008, 2006, 2005-2004, 2003 and 2001Plus
  • Drawing and Detailing with SolidWorks 2012, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002 and 2001/2001Plus
  • Engineering Design with SolidWorks with Multimedia CD 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2001Plus, 2001 and 1999
  • Engineering Graphics with SolidWorks 2012, 2011, 2010 with Multimedia CD
  • SolidWorks: The Basics with Multimedia CD 2009, 2008, 2007, 2006, 2005, 2004 and 2003
  • SolidWorks Tutorial with Multimedia CD 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003 and 2001/2001Plus
  • The Fundamentals of SolidWorks: Featuring the VEXplorer robot, 2008 and 2007
  • Official Certified SolidWorks Associate Examination Guide, Version 3; 2011, 2010, 2009, Version 2; 2010, 2009, 2008, Version 1; 2007
  • Official Certified SolidWorks Professional (CSWP) Certification Guide with Multimedia DVD, 2011, 2010
  • Applications in Sheet Metal Using Pro/SHEETMETAL & Pro/ENGINEER

"Sobre este título" puede pertenecer a otra edición de este libro.

Los mejores resultados en AbeBooks

1.

Planchard, David; Planchard, Marie
Publicado por SDC Publications
ISBN 10: 1585037087 ISBN 13: 9781585037087
Nuevo PERFECT PAPERBACK Cantidad disponible: 1
Librería
Recycleabook
(West Carrollton, OH, Estados Unidos de America)
Valoración
[?]

Descripción SDC Publications. PERFECT PAPERBACK. Condición: New. 1585037087 Still in wrapper!!-US STUDENT EDITION - Free Tracking number with every purchase. Satisfaction guaranteed. Orders ship within 1-2 business days. (Hawaii,Alaska, Puerto Rico and APO's, allow additional time for delivery.). Nº de ref. del artículo: Z1585037087ZN

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 32,35
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,42
A Estados Unidos de America
Destinos, gastos y plazos de envío

2.

David Planchard; Marie Planchard
Publicado por SDC Publications (2012)
ISBN 10: 1585037087 ISBN 13: 9781585037087
Nuevo Perfect Paperback Cantidad disponible: 1
Librería
Ergodebooks
(RICHMOND, TX, Estados Unidos de America)
Valoración
[?]

Descripción SDC Publications, 2012. Perfect Paperback. Condición: New. Nº de ref. del artículo: DADAX1585037087

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 45,14
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,42
A Estados Unidos de America
Destinos, gastos y plazos de envío

3.

David Planchard; Marie Planchard
Publicado por SDC Publications (2012)
ISBN 10: 1585037087 ISBN 13: 9781585037087
Nuevo Tapa blanda Cantidad disponible: 1
Librería
Irish Booksellers
(Portland, ME, Estados Unidos de America)
Valoración
[?]

Descripción SDC Publications, 2012. Condición: New. book. Nº de ref. del artículo: M1585037087

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 51,94
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío

4.

David Planchard, Marie Planchard
Publicado por SDC Publications (2012)
ISBN 10: 1585037087 ISBN 13: 9781585037087
Nuevo Perfect Paperback Cantidad disponible: 1
Librería
Murray Media
(North Miami Beach, FL, Estados Unidos de America)
Valoración
[?]

Descripción SDC Publications, 2012. Perfect Paperback. Condición: New. Never used!. Nº de ref. del artículo: P111585037087

Más información sobre este vendedor | Contactar al vendedor

Comprar nuevo
EUR 75,99
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío