Pro/MECHANICA Motion - Mechanism Design & Analysis

0 valoración promedio
( 0 valoraciones por Goodreads )
 
9781585031917: Pro/MECHANICA Motion - Mechanism Design & Analysis

This book was created to introduce Pro/MECHANICA Motion, which supports virtual prototyping for analysis and mechanism design. It covers most of the major concepts and frequently used commands required to advance from a novice to an intermediate user level. Basic concepts include: motion model creation, such as body and joint definitions; analysis type selection, such as assembly analysis, kinematics and dynamics; design study preparation, including design problem definition, sensitivity study and optimizations. The concepts are introduced using simple but realistic examples.

Table of Contents

1. Introduction to Pro/MECHANICA Motion
2. The Ball Throwing Example -- Integrated Mode
3. The Ball Throwing Example -- Independent Mode
4. A Simple Pendulum -- Integrated Mode
5. A Simple Pendulum -- Independent Mode
6. A Slider-Crank Mechanism -- Initial Assembly and Motion Analysis
7. A Slider-Crank Mechanism -- Design Study
8. A Slider-Crank Mechanism -- Independent Mode and Dynamics Analysis
9. A Slider-Crank Mechanism -- Optimization Design Study
10. Multiple Pendulums
Appendix A: Defining Joints
Appendix B: The Default Unit System

"Sinopsis" puede pertenecer a otra edición de este libro.

About the Author:

Kuang-Hua Chang is and Associate Professor for the School of Aerospace and Mechanical Engineering, the University of Oklahoma, Norman, OK. He received his diploma in Mechanical Engineering from National Taipei Institute of Technology, Taiwan in 1980; a M.S. and Ph.D. in Mechanical Engineering from the University of Iowa in 1987 and 1990, respectively. Since then, he joined the Center for Computer-Aided Design at Iowa as Research Scientist and CAE technical Manager. In 1996, he joined Northern Illinois University as an Assistant Professor. In1997, he joined OU. His areas of interest in clued Virtual Prototyping, CAD, Mechanical Fatigue and Reliably Analysis; Tools and Information Integration for Concurrent Design and Manufacturing; and Solid Freeform Fabrication. His research has been published in more than 100 articles in international journals and conference proceedings. Dr. Chang has also won numerous awards in both teaching and research in the past few years.

"Sobre este título" puede pertenecer a otra edición de este libro.

Los mejores resultados en AbeBooks

1.

Kuang-Hua Chang
Editorial: Schroff Development Corporation (2005)
ISBN 10: 1585031917 ISBN 13: 9781585031917
Usado Cantidad: 1
Librería
Better World Books
(Mishawaka, IN, Estados Unidos de America)
Valoración
[?]

Descripción Schroff Development Corporation, 2005. Estado de conservación: Good. Shows some signs of wear, and may have some markings on the inside. Nº de ref. de la librería GRP47871088

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar usado
EUR 7,84
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío

2.

Kuang-Hua Chang
Editorial: Schroff Development Corporation
ISBN 10: 1585031917 ISBN 13: 9781585031917
Usado Cantidad: 2
Librería
Phatpocket Limited
(Waltham Abbey, HERTS, Reino Unido)
Valoración
[?]

Descripción Schroff Development Corporation. Estado de conservación: Very Good. Used - Very Good. Ex-library, but has been well cared for. Nº de ref. de la librería Z1-L-018-00758

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar usado
EUR 17,58
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 6,70
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

3.

Kuang-Hua Chang
Editorial: Schroff Development Corporation (2005)
ISBN 10: 1585031917 ISBN 13: 9781585031917
Usado Paperback Cantidad: 1
Librería
Ergodebooks
(RICHMOND, TX, Estados Unidos de America)
Valoración
[?]

Descripción Schroff Development Corporation, 2005. Paperback. Estado de conservación: Used: Good. Nº de ref. de la librería SONG1585031917

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar usado
EUR 36,37
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,39
A Estados Unidos de America
Destinos, gastos y plazos de envío