Embedded Systems: Real-Time Interfacing to Arm® Cortex(TM)-M Microcontrollers: 2

4,18 valoración promedio
( 17 valoraciones por GoodReads )
 
9781463590154: Embedded Systems: Real-Time Interfacing to Arm® Cortex(TM)-M Microcontrollers: 2
From the Publisher:

This book, published December 2013 as a third edition, is the second in a series of three books that teach the fundamentals of embedded systems as applied to ARM Cortex-M microcontrollers. The three books are primarily written for undergraduate electrical and computer engineering students. They could also be used for professionals learning the ARM platform. The first book Embedded Systems: Introduction to ARM Cortex-M Microcontrollers is an introduction to computers and interfacing focusing on assembly language and C programming. This second book focuses on interfacing and the design of embedded systems. The third book Embedded Systems: Real-Time Operating Systems for ARM Cortex-M Microcontrollers is an advanced book focusing on operating systems, high-speed interfacing, control systems, and robotics. An embedded system is a system that performs a specific task and has a computer embedded inside. Topics include microcontrollers, design, verification, hardware/software synchronization, interfacing devices to the computer, timing diagrams, real-time systems, data collection and processing, motor control, analog and digital filters, and real-time signal processing. In general, the area of embedded systems is an important and growing discipline within electrical and computer engineering. The educational market of embedded system is dominated by simple microcontrollers like the PIC, 9S12, and 8051. This is because of their market share, low cost, and historical dominance. However, as problems become more complex, so must the systems that solve them. A number of embedded system paradigms must shift in order to accommodate this growth in complexity. First, the number of calculations per second will increase from about 1 million/sec to 1 billion/sec. Similarly, the number of lines of software code will also increase from thousands to millions. Thirdly, systems will involve multiple microcontrollers supporting many simultaneous operations. Lastly, the need for system verification will continue to grow as these systems are deployed into safety critical applications. These changes are more than a simple growth in size and bandwidth. These systems must employ parallel programming, DMA synchronization, real-time operating systems, fault tolerant design, priority interrupt handling, and networking. Consequently, it will be important to provide our students with these types of design experiences. The ARM platform is both low cost and provides the high performance features required in future embedded systems. The ARM market share is currently large and growing. Furthermore, students trained on the ARM will be equipped to design systems across the complete spectrum from simple to complex. The purpose of writing this book at this time is to bring engineering education into the 21st century. This book employs many approaches to learning. It will not include an exhaustive recapitulation of the information in data sheets. First, it begins with basic fundamentals, which allows the reader to solve new problems with new technology. Second, the book presents many detailed design examples. These examples illustrate the process of design. There are multiple structural components that assist learning. Checkpoints, with answers in the back, are short easy to answer questions providing immediate feedback while reading. Simple homework, with answers to the odd questions on the web, provide more detailed learning opportunities. The book includes an index and a glossary so that information can be searched. The most important learning experience in a class like this are of course the laboratories. Each chapter has suggested lab assignments. More detailed lab descriptions are available on the web. The book will cover embedded systems for the ARM Cortex-M with specific details on the LM3S1968, LM3S8962, and TM4C123. Although the solutions are specific for the Stellaris LM3S and Tiva TM4C, it will be possible to use this book for other ARM derivatives.

About the Author:

Jonathan Valvano has been teaching microcontrollers and embedded systems at the University of Texas at Austin for 33 years. He has written six college textbooks. His first three textbooks on the Freescale 9S12 have been widely used around the world. He earned his BS and MS from MIT in 1977 in the fields of Computer Science and Electrical Engineering. In 1981, he received his PhD from Harvard-MIT in the field of biomedical engineering. He has over 100 journal papers, 9 book chapters and 10 patents in the medical device research area. He is a cofounder of a successful medical device company, specializing in miniature and low-power cardiac measurements. The reason he has received numerous teaching awards at the University of Texas is because he and his students share a common interest at the very core of the education process: the students’ own success. “It is difficult to find a professor that tries harder to educate and inspire his students than Professor Valvano” – Robin Tsang.

"Sobre este título" puede pertenecer a otra edición de este libro.

Los mejores resultados en AbeBooks

1.

Valvano, Jonathan W.
Editorial: CreateSpace (2013)
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos Cantidad: 1
Librería
textbooksNow
(Westchester, IL, Estados Unidos de America)
Valoración
[?]

Descripción CreateSpace, 2013. Estado de conservación: New. 3rd Edition. 3rd Edition-Inventory is subject to prior sale. SHIPPING: Only Standard shipping to PO Boxes. We are not able to ship to APO/FPOs or Internationally. Orders are shipped from Illinois. Nº de ref. de la librería 5825881N1

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 35,37
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,71
A Estados Unidos de America
Destinos, gastos y plazos de envío

2.

Valvano, Jonathan W.
Editorial: CreateSpace Independent Publishing Platform (2011)
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos PAPERBACK Cantidad: 5
Librería
PetesCheapBooks
(Long Beach, CA, Estados Unidos de America)
Valoración
[?]

Descripción CreateSpace Independent Publishing Platform, 2011. PAPERBACK. Estado de conservación: New. 1463590156 *NEW!* RETURNS ARE NO PROBLEM! We LOVE happy customers. All of our orders are sent with tracking information when possible. Abebooks-. Nº de ref. de la librería NCLN13058029

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 37,83
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,71
A Estados Unidos de America
Destinos, gastos y plazos de envío

3.

Valvano, Jonathan W.
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos Paperback Cantidad: > 20
Impresión bajo demanda
Librería
BargainBookStores
(Grand Rapids, MI, Estados Unidos de America)
Valoración
[?]

Descripción Paperback. Estado de conservación: New. This item is printed on demand. Item doesn't include CD/DVD. Nº de ref. de la librería 2693620

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 41,05
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,71
A Estados Unidos de America
Destinos, gastos y plazos de envío

4.

Valvano, Jonathan W.
Editorial: CreateSpace Independent Publishing Platform (2011)
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos Paperback Cantidad: 10
Librería
Ergodebooks
(RICHMOND, TX, Estados Unidos de America)
Valoración
[?]

Descripción CreateSpace Independent Publishing Platform, 2011. Paperback. Estado de conservación: New. Nº de ref. de la librería INGM9781463590154

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 49,48
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,71
A Estados Unidos de America
Destinos, gastos y plazos de envío

5.

Valvano, Jonathan W.
Editorial: CreateSpace Independent Publishing Platform (2011)
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos Tapa blanda Cantidad: 1
Librería
Book Deals
(Lewiston, NY, Estados Unidos de America)
Valoración
[?]

Descripción CreateSpace Independent Publishing Platform, 2011. Estado de conservación: New. Brand New, Unread Copy in Perfect Condition. A+ Customer Service! Summary: This book, published July 2014 as a fourth edition 2nd printing, is the second in a series of three books that teach the fundamentals of embedded systems as applied to ARM Cortex-M microcontrollers. The three books are primarily written for undergraduate electrical and computer engineering students. They could also be used for professionals learning the ARM platform. The first book Embedded Systems: Introduction to ARM Cortex-M Microcontrollers is an introduction to computers and interfacing focusing on assembly language and C programming. This second book focuses on interfacing and system-level design. The third book Embedded Systems: Real-Time Operating Systems for ARM Cortex-M Microcontrollers is an advanced book focusing on operating systems, high-speed interfacing, control systems, and robotics. An embedded system is a system that performs a specific task and has a computer embedded inside. Topics include design, verification, hardware/software synchronization, interfacing devices to the computer, timing diagrams, real-time systems, data collection and processing, motor control, analog and digital filters, real-time signal processing, and the internet of things.In general, the area of embedded systems is an important and growing discipline within electrical and computer engineering. The educational market of embedded system is dominated by simple microcontrollers like the PIC, 9S12, and 8051. This is because of their market share, low cost, and historical dominance. However, as problems become more complex, so must the systems that solve them. A number of embedded system paradigms must shift in order to accommodate this growth in complexity. First, the number of calculations per second will increase from about 1 million/sec to 1 billion/sec. Similarly, the number of lines of software code will also increase from thousands to millions. Thirdly, systems will involve multiple microcontrollers supporting many simultaneous operations. Lastly, the need for system verification will continue to grow as these systems are deployed into safety critical applications. These changes are more than a simple growth in size and bandwidth. These systems must employ parallel programming, DMA synchronization, real-time operating systems, fault tolerant design, priority interrupt handling, and networking. Consequently, it will be important to provide our students with these types of design experiences. The ARM platform is both low cost and provides the high performance features required in future embedded systems. The ARM market share is currently large and growing. Furthermore, students trained on the ARM will be equipped to design systems across the complete spectrum from simple to complex. The purpose of writing this book at this time is to bring engineering education into the 21st century.This book employs many approaches to learning. It will not include an exhaustive recapitulation of the information in data sheets. First, it begins with basic fundamentals, which allows the reader to solve new problems with new technology. Second, the book presents many detailed design examples. These examples illustrate the process of design. There are multiple structural components that assist learning. Checkpoints, with answers in the back, are short easy to answer questions providing immediate feedback while reading. Simple homework provide more detailed learning opportunities. The book includes an index and a glossary so that information can be searched. The most important learning experience in a class like this are of course the laboratories. Each chapter has suggested lab assignments. More detailed lab descriptions are available on the web.The book will cover embedded systems for the ARM Cortex-M with specific details on the LM3S1968, TM4C123, and TM4C1294. Although the solutions are specific for the Stellaris LM3S and Tiva TM4C, it will be possible to use this book for oth. Nº de ref. de la librería ABE_book_new_1463590156

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 53,28
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
A Estados Unidos de America
Destinos, gastos y plazos de envío

6.

Valvano, Jonathan W.
Editorial: Createspace, United States (2011)
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos Paperback Cantidad: 10
Impresión bajo demanda
Librería
The Book Depository US
(London, Reino Unido)
Valoración
[?]

Descripción Createspace, United States, 2011. Paperback. Estado de conservación: New. 2nd. 234 x 190 mm. Language: English . Brand New Book ***** Print on Demand *****. This book, published July 2015 as a fifth edition 1st printing, is the second in a series of three books that teach the fundamentals of embedded systems as applied to ARM Cortex-M microcontrollers. The three books are primarily written for undergraduate electrical and computer engineering students. They could also be used for professionals learning the ARM platform. The first book Embedded Systems: Introduction to ARM Cortex-M Microcontrollers is an introduction to computers and interfacing focusing on assembly language and C programming. This second book focuses on interfacing and system-level design. The third book Embedded Systems: Real-Time Operating Systems for ARM Cortex-M Microcontrollers is an advanced book focusing on operating systems, high-speed interfacing, control systems, and robotics. An embedded system is a system that performs a specific task and has a computer embedded inside. Topics include design, verification, hardware/software synchronization, interfacing devices to the computer, timing diagrams, real-time systems, data collection and processing, motor control, analog and digital filters, real-time signal processing, low-power design, and the internet of things. In general, the area of embedded systems is an important and growing discipline within electrical and computer engineering. The educational market of embedded system is dominated by simple microcontrollers like the PIC, 9S12, and 8051. This is because of their market share, low cost, and historical dominance. However, as problems become more complex, so must the systems that solve them. A number of embedded system paradigms must shift in order to accommodate this growth in complexity. First, the number of calculations per second will increase from about 1 million/sec to 1 billion/sec. Similarly, the number of lines of software code will also increase from thousands to millions. Thirdly, systems will involve multiple microcontrollers supporting many simultaneous operations. Lastly, the need for system verification will continue to grow as these systems are deployed into safety critical applications. These changes are more than a simple growth in size and bandwidth. These systems must employ parallel programming, DMA synchronization, real-time operating systems, fault tolerant design, priority interrupt handling, and networking. Consequently, it will be important to provide our students with these types of design experiences. The ARM platform is both low cost and provides the high performance features required in future embedded systems. The ARM market share is currently large and growing. Furthermore, students trained on the ARM will be equipped to design systems across the complete spectrum from simple to complex. The purpose of writing this book at this time is to bring engineering education into the 21st century. This book employs many approaches to learning. It will not include an exhaustive recapitulation of the information in data sheets. First, it begins with basic fundamentals, which allows the reader to solve new problems with new technology. Second, the book presents many detailed design examples. These examples illustrate the process of design. There are multiple structural components that assist learning. Checkpoints, with answers in the back, are short easy to answer questions providing immediate feedback while reading. Simple homework provide more detailed learning opportunities. The book includes an index and a glossary so that information can be searched. The most important learning experience in a class like this are of course the laboratories. Each chapter has suggested lab assignments. More detailed lab descriptions are available on the web. The book will cover embedded systems for the ARM Cortex-M with specific details on the TM4C123, and TM4C1294. Although the solutions are specific for the Tiva TM4C, it will be possible to use this book for other ARM derivatives. Nº de ref. de la librería APC9781463590154

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 53,29
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

7.

Valvano, Jonathan W.
Editorial: Createspace, United States (2011)
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos Paperback Cantidad: 10
Impresión bajo demanda
Librería
The Book Depository
(London, Reino Unido)
Valoración
[?]

Descripción Createspace, United States, 2011. Paperback. Estado de conservación: New. 2nd. 234 x 190 mm. Language: English . Brand New Book ***** Print on Demand *****.This book, published July 2015 as a fifth edition 1st printing, is the second in a series of three books that teach the fundamentals of embedded systems as applied to ARM Cortex-M microcontrollers. The three books are primarily written for undergraduate electrical and computer engineering students. They could also be used for professionals learning the ARM platform. The first book Embedded Systems: Introduction to ARM Cortex-M Microcontrollers is an introduction to computers and interfacing focusing on assembly language and C programming. This second book focuses on interfacing and system-level design. The third book Embedded Systems: Real-Time Operating Systems for ARM Cortex-M Microcontrollers is an advanced book focusing on operating systems, high-speed interfacing, control systems, and robotics. An embedded system is a system that performs a specific task and has a computer embedded inside. Topics include design, verification, hardware/software synchronization, interfacing devices to the computer, timing diagrams, real-time systems, data collection and processing, motor control, analog and digital filters, real-time signal processing, low-power design, and the internet of things. In general, the area of embedded systems is an important and growing discipline within electrical and computer engineering. The educational market of embedded system is dominated by simple microcontrollers like the PIC, 9S12, and 8051. This is because of their market share, low cost, and historical dominance. However, as problems become more complex, so must the systems that solve them. A number of embedded system paradigms must shift in order to accommodate this growth in complexity. First, the number of calculations per second will increase from about 1 million/sec to 1 billion/sec. Similarly, the number of lines of software code will also increase from thousands to millions. Thirdly, systems will involve multiple microcontrollers supporting many simultaneous operations. Lastly, the need for system verification will continue to grow as these systems are deployed into safety critical applications. These changes are more than a simple growth in size and bandwidth. These systems must employ parallel programming, DMA synchronization, real-time operating systems, fault tolerant design, priority interrupt handling, and networking. Consequently, it will be important to provide our students with these types of design experiences. The ARM platform is both low cost and provides the high performance features required in future embedded systems. The ARM market share is currently large and growing. Furthermore, students trained on the ARM will be equipped to design systems across the complete spectrum from simple to complex. The purpose of writing this book at this time is to bring engineering education into the 21st century. This book employs many approaches to learning. It will not include an exhaustive recapitulation of the information in data sheets. First, it begins with basic fundamentals, which allows the reader to solve new problems with new technology. Second, the book presents many detailed design examples. These examples illustrate the process of design. There are multiple structural components that assist learning. Checkpoints, with answers in the back, are short easy to answer questions providing immediate feedback while reading. Simple homework provide more detailed learning opportunities. The book includes an index and a glossary so that information can be searched. The most important learning experience in a class like this are of course the laboratories. Each chapter has suggested lab assignments. More detailed lab descriptions are available on the web. The book will cover embedded systems for the ARM Cortex-M with specific details on the TM4C123, and TM4C1294. Although the solutions are specific for the Tiva TM4C, it will be possible to use this book for other ARM derivatives. Nº de ref. de la librería APC9781463590154

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 53,80
Convertir moneda

Añadir al carrito

Gastos de envío: GRATIS
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío

8.

Valvano, Jonathan W.
Editorial: Createspace
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos Paperback Cantidad: 20
Impresión bajo demanda
Librería
BuySomeBooks
(Las Vegas, NV, Estados Unidos de America)
Valoración
[?]

Descripción Createspace. Paperback. Estado de conservación: New. This item is printed on demand. Paperback. This book, now in its second edition, is the second in a series of three books that teach the fundamentals of embedded systems as applied to ARM Cortex-M microcontrollers. The three books are primarily written for undergraduate electrical and computer engineering students. They could also be used for professionals learning the ARM platform. The first book Embedded Systems: Introduction to ARM Cortex-M Microcontrollers is an introduction to computers and interfacing focusing on assembly language and C programming. This second book focuses on interfacing and the design of embedded systems. The third book Embedded Systems: Real-Time Operating Systems for ARM Cortex-M Microcontrollers is an advanced book focusing on operating systems, high-speed interfacing, control systems, and robotics. An embedded system is a system that performs a specific task and has a computer embedded inside. Topics include microcontrollers, design, verification, hardwaresoftware synchronization, interfacing devices to the computer, timing diagrams, real-time systems, data collection and processing, motor control, analog filters, digital filters, and real-time signal processing. In general, the area of embedded systems is an important and growing discipline within electrical and computer engineering. The educational market of embedded system is dominated by simple microcontrollers like the PIC, 9S12, and 8051. This is because of their market share, low cost, and historical dominance. However, as problems become more complex, so must the systems that solve them. A number of embedded system paradigms must shift in order to accommodate this growth in complexity. First, the number of calculations per second will increase from about 1 millionsec to 1 billionsec. Similarly, the number of lines of software code will also increase from 1000s to 10 to 100 million. Thirdly, systems will involve multiple microcontrollers supporting many simultaneous operations. Lastly, the need for system verification will continue to grow as these systems are deployed into safety critical applications. These changes are more than a simple growth in size and bandwidth. These systems must employ parallel programming, DMA synchronization, real-time operating systems, fault tolerant design, priority interrupt handling, and networking. Consequently, it will be important to provide our students with these types of design experiences. The ARM platform is both low cost and provides the high performance features required in future embedded systems. The ARM market share is currently large and growing. Furthermore, students trained on the ARM will be equipped to design systems across the complete spectrum from simple to complex. The purpose of writing this book at this time is to bring engineering education into the 21st century. This book employs many approaches to learning. It will not include an exhaustive recapitulation of the information in data sheets. First, it begins with basic fundamentals, which allows the reader to solve new problems with new technology. Second, the book presents many detailed design examples. These examples illustrate the process of design. There are multiple structural components that assist learning. Checkpoints, with answers in the back, are short easy to answer questions providing immediate feedback while reading. Simple homework, with answers to the odd questions on the web, provide more detailed learning opportunities. The book includes an index and a glossary so that information can be searched. The most important learning experience in a class like this are of course the laboratories. Each chapter has suggested lab assignments. More detailed lab descriptions are available on the web. The book will cover embedded systems for the ARM Cortex-M with specific details on the LM3S811, LM3S1968, LM3S8962, and LM4F120. Although the solutions are specific for the Stellaris LM3S and LM4 This item ships from La Vergne,TN. Paperback. Nº de ref. de la librería 9781463590154

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 51,66
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,67
A Estados Unidos de America
Destinos, gastos y plazos de envío

9.

Valvano, Jonathan W.
Editorial: CreateSpace Independent Publishing Platform (2011)
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos Paperback Cantidad: 1
Librería
Ergodebooks
(RICHMOND, TX, Estados Unidos de America)
Valoración
[?]

Descripción CreateSpace Independent Publishing Platform, 2011. Paperback. Estado de conservación: New. Nº de ref. de la librería DADAX1463590156

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 52,86
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 3,71
A Estados Unidos de America
Destinos, gastos y plazos de envío

10.

Valvano, Jonathan W.
Editorial: CreateSpace Independent Publishing Platform
ISBN 10: 1463590156 ISBN 13: 9781463590154
Nuevos PAPERBACK Cantidad: > 20
Librería
Russell Books
(Victoria, BC, Canada)
Valoración
[?]

Descripción CreateSpace Independent Publishing Platform. PAPERBACK. Estado de conservación: New. 1463590156 Special order direct from the distributor. Nº de ref. de la librería ING9781463590154

Más información sobre esta librería | Hacer una pregunta a la librería

Comprar nuevo
EUR 53,79
Convertir moneda

Añadir al carrito

Gastos de envío: EUR 6,51
De Canada a Estados Unidos de America
Destinos, gastos y plazos de envío

Existen otras copia(s) de este libro

Ver todos los resultados de su búsqueda