"Sinopsis" puede pertenecer a otra edición de este libro.
Here is a complete guide to preparing a variety of specimens for the scanning electron microscope and x-ray microanalyzer. Specimens range from inorganic, organic, biological, and geological samples to materials such as metals, polymers, and semiconductors.
"Sobre este título" puede pertenecer a otra edición de este libro.
Gastos de envío:
EUR 23,00
De Alemania a Estados Unidos de America
Descripción Taschenbuch. Condición: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Scanning electr on microscopy (SEM) and x-ray microanalysis can produce magnified images and in situ chemical information from virtually any type of specimen. The two instruments generally operate in a high vacuum and a very dry environment in order to produce the high energy beam of electrons needed for imaging and analysis. With a few notable exceptions, most specimens destined for study in the SEM are poor conductors and composed of beam sensitive light elements containing variable amounts of water. In the SEM, the imaging system depends on the specimen being sufficiently electrically conductive to ensure that the bulk of the incoming electrons go to ground. The formation of the image depends on collecting the different signals that are scattered as a consequence of the high energy beam interacting with the sample. Backscattered electrons and secondary electrons are generated within the primary beam-sample interactive volume and are the two principal signals used to form images. The backscattered electron coefficient ( ) increases with increasing atomic number of the specimen, whereas the secondary electron coefficient ( ) is relatively insensitive to atomic number. This fundamental diff- ence in the two signals can have an important effect on the way samples may need to be prepared. The analytical system depends on collecting the x-ray photons that are generated within the sample as a consequence of interaction with the same high energy beam of primary electrons used to produce images. 344 pp. Englisch. Nº de ref. del artículo: 9781441946744
Descripción Condición: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Identifies problems that all specimens present in examining their structure and analysis in the SEMDescribes a series of protocols to ensure that a specimen is properly prepared once the particular problems are identifiedGuides the reader t. Nº de ref. del artículo: 4175007
Descripción Condición: New. Book is in NEW condition. Nº de ref. del artículo: 1441946748-2-1
Descripción Taschenbuch. Condición: Neu. Druck auf Anfrage Neuware - Printed after ordering - Scanning electr on microscopy (SEM) and x-ray microanalysis can produce magnified images and in situ chemical information from virtually any type of specimen. The two instruments generally operate in a high vacuum and a very dry environment in order to produce the high energy beam of electrons needed for imaging and analysis. With a few notable exceptions, most specimens destined for study in the SEM are poor conductors and composed of beam sensitive light elements containing variable amounts of water. In the SEM, the imaging system depends on the specimen being sufficiently electrically conductive to ensure that the bulk of the incoming electrons go to ground. The formation of the image depends on collecting the different signals that are scattered as a consequence of the high energy beam interacting with the sample. Backscattered electrons and secondary electrons are generated within the primary beam-sample interactive volume and are the two principal signals used to form images. The backscattered electron coefficient ( ) increases with increasing atomic number of the specimen, whereas the secondary electron coefficient ( ) is relatively insensitive to atomic number. This fundamental diff- ence in the two signals can have an important effect on the way samples may need to be prepared. The analytical system depends on collecting the x-ray photons that are generated within the sample as a consequence of interaction with the same high energy beam of primary electrons used to produce images. Nº de ref. del artículo: 9781441946744
Descripción Condición: New. New! This book is in the same immaculate condition as when it was published. Nº de ref. del artículo: 353-1441946748-new
Descripción Paperback. Condición: Brand New. 342 pages. 9.90x6.90x0.90 inches. In Stock. Nº de ref. del artículo: 1441946748