Artículos relacionados a An Introduction to Mechanical Engineering
Reseña del editor
Gain insight into today's ever-emerging field of mechanical engineering as you develop an appreciation for how engineers design the hardware that builds and improves societies around the world. AN INTRODUCTION TO MECHANICAL ENGINEERING, 4E is an ideal resource during your first or second year of your mechanical engineering program. It's also a useful tool if you are pursuing a closely related field. The book balances timely treatments of technical problem-solving skills, design, engineering analysis, and modern technology to provide the solid mechanical engineering foundation you need for future success.
Biografía del autor
A professor of mechanical engineering at Iowa State University, Dr. Jonathan Wickert teaches and conducts research in the areas of applied mechanics, dynamics, and mechanical vibration. As a researcher and consultant, he has worked with companies and federal agencies on a diverse range of engineering problems including computer disk drives and tape libraries, the manufacture of sheet metal, and various consumer products. Dr. Wickert received his B.S., M.S., and Ph.D. degrees in mechanical engineering from the University of California, Berkeley. He has served as associate editor of engineering journals, as a division chair in the American Society of Mechanical Engineers, and as chair of the undergraduate mechanical engineering program at Carnegie Mellon University. Dr. Wickert has received awards in recognition of his teaching and research from the Society of Automotive Engineers, the American Society for Engineering Education, and the Information Storage Industry Consortium. He was also elected a fellow of the American Society of Mechanical Engineers.
A professor of mechanical and aerospace engineering at the University at Buffalo -- SUNY, Dr. Kemper Lewis teaches and conducts research in the areas of mechanical design, system optimization, and decision modeling. As a researcher and consultant, he has worked with companies and federal agencies on a wide range of engineering design problems. Dr. Lewis received his B.S. in mechanical engineering and B.A. in mathematics from Duke University and his M.S. and Ph.D. degrees in mechanical engineering from the Georgia Institute of Technology. He has served as associate editor of the ASME Journal of Mechanical Design. He has also served on the ASME Design Automation Executive Committee and on the National Academies Panel on Benchmarking the Research Competitiveness of the United States in Mechanical Engineering. In addition, he has worked as the Executive Director of the New York State Center for Engineering Design and Industrial Innovation. Dr. Lewis has received awards in recognition of his teaching and research from the Society of Automotive Engineers, the American Society for Engineering Education, the American Institute of Aeronautics and Astronautics, and the National Science Foundation.
"Sobre este título" puede pertenecer a otra edición de este libro.
- EditorialCl-Engineering
- Año de publicación2016
- ISBN 10 1305635132
- ISBN 13 9781305635135
- EncuadernaciónTapa blanda
- IdiomaInglés
- Número de edición4
- Número de páginas407
Comprar nuevo
Ver este artículo
EUR 154,44
EUR 3,75 gastos de envío en Estados Unidos de America
Destinos, gastos y plazos de envíoOtras ediciones populares con el mismo título
Resultados de la búsqueda para An Introduction to Mechanical Engineering
Imagen de archivo
An Introduction to Mechanical Engineering
Publicado por
Cengage Learning (edition 4), 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
Paperback
Librería: BooksRun, Philadelphia, PA, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Fair. 4. Heavy wear. Ship within 24hrs. Satisfaction 100% guaranteed. APO/FPO addresses supported. Nº de ref. del artículo: 1305635132-7-1-13
Cantidad disponible: 1 disponibles
Imagen de archivo
An Introduction to Mechanical Engineering
Publicado por
Cengage Learning, 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
paperback
Librería: CANUSA, LLC, Sault Ste. Marie, MI, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
paperback. Condición: Good. Nº de ref. del artículo: 00496
Cantidad disponible: 1 disponibles
Imagen de archivo
An Introduction to Mechanical Engineering
Publicado por
Cengage Learning (edition 4), 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
Paperback
Librería: BooksRun, Philadelphia, PA, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: Good. 4. Ship within 24hrs. Satisfaction 100% guaranteed. APO/FPO addresses supported. Nº de ref. del artículo: 1305635132-11-1
Cantidad disponible: 1 disponibles
Imagen de archivo
An Introduction to Mechanical Engineering
Publicado por
Cengage Learning, 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
Paperback
Librería: GoldBooks, Denver, CO, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: fair. Very Good Copy. Customer Service Guaranteed. Nº de ref. del artículo: 5I2_3_1305635132
Cantidad disponible: 1 disponibles
Imagen del vendedor
An Introduction to Mechanical Engineering
Publicado por
Cengage Learning, 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
Tapa blanda
Librería: Goodbooks Company, Springdale, AR, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: acceptable. This copy may contain significant wear, including bending, writing, tears, and or water damage. This book is a functional copy, not necessarily a beautiful copy. Copy may have loose or missing pages and may not include access codes or CD. Nº de ref. del artículo: GBV.1305635132.A
Cantidad disponible: 1 disponibles
Imagen del vendedor
An Introduction to Mechanical Engineering
Publicado por
Cengage Learning, 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
Tapa blanda
Librería: Goodwill Northern Illinois, Rockford, IL, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: good. The cover shows wear with possible indentations, creases, and small tears. The pages show wear that may include evidence of handling, smudges, and edge discoloration markings stains . The book may or may not have mild corner dings. Nº de ref. del artículo: 4LFSZV000DB2_ns
Cantidad disponible: 1 disponibles
Imagen del vendedor
An Introduction to Mechanical Engineering
Publicado por
Cengage Learning, 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
Tapa blanda
Librería: tLighthouse Books, Onekama, MI, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: good. A copy that has been read, but remains in clean condition. All pages are intact, and the cover is intact. The spine and cover may show signs of wear. Pages can include limited notes and highlighting, and the copy can include "From the library of" labels or previous owner inscriptions. 100% GUARANTEE! Shipped with delivery confirmation. If you're not satisfied with purchase please return item for full refund. Nº de ref. del artículo: 58BRJQ000KP1_ns
Cantidad disponible: 1 disponibles
Imagen de archivo
Introduction to Mechanical Engineering
Publicado por
Nelson Education Limited, 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
Tapa blanda
Librería: TextbookRush, Grandview Heights, OH, Estados Unidos de America
Calificación del vendedor: 4 de 5 estrellas
Condición: Good. Ships SAME or NEXT business day. We Ship to APO/FPO addr. Choose EXPEDITED shipping and receive in 2-5 business days within the United States. See our member profile for customer support contact info. We have an easy return policy. Nº de ref. del artículo: 54568727
Cantidad disponible: 1 disponibles
Imagen de archivo
An Introduction to Mechanical Engineering
Publicado por
Cengage Learning, 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
Paperback
Librería: GoldBooks, Denver, CO, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: very good. Very Good Copy. Customer Service Guaranteed. Nº de ref. del artículo: 5I3_7_1305635132
Cantidad disponible: 1 disponibles
Imagen de archivo
An Introduction to Mechanical Engineering
Publicado por
Cengage Learning, 2016
ISBN 10: 1305635132
ISBN 13: 9781305635135
Antiguo o usado
Paperback
Librería: Grumpys Fine Books, Tijeras, NM, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Paperback. Condición: very good. little wear and tear. Nº de ref. del artículo: Grumpy1305635132
Cantidad disponible: 1 disponibles