The Young Mechanic, by the Author of 'the Lathe and Its Uses'.

9780217966276: The Young Mechanic, by the Author of 'the Lathe and Its Uses'.
From the Publisher:

This historic book may have numerous typos and missing text. Purchasers can download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1871. Excerpt: ... Chapter XIV. HOW TO MAKE AN ENGINE. HE very first mechanical work of difficulty, but of pre-eminent importance, in making an engine, is boring the cylinder, that is, if the same is a casting, and not a piece of tube ready made and smooth on the inside. This is, properly speaking, lathe work, yet may be done in a different way. Suppose you have bought your entire set of castings, which is the best way, and that the cylinder is half an inch diameter inside, which is a manageable size to work upon. Get a half-inch rosebit, which is very like the countersinks sold with the carpenter's brace and bits. Mount it in the lathe in a chuck, A, Fig. 65. Unscrew the point of the back poppit, and slip over the spindle a boring-flange, B, which is merely a flat plate like a surface chuck, only the socket is not screwed but bored out, generally large enough to slip over the spindle. Sometimes there is, however, a screw at the back, to screw into the spindle, the same as the points or centres. On the face of this lay a piece of board of equal thickness, but it is as well if not planed, as its object is partly to prevent the cylinder from slipping about during the operation, as it is sometimes inclined to do upon the smooth metal flange, and partly to prevent the borer or rosebit from coming in contact with the flange when it has passed through the cylinder. Grasp the latter in the left hand, and you can easily prevent it from revolving with the drill, which will go through rapidly, and leave the hole beautifully finished and quite true from end to end,--indeed, I have bored iron also, rapidly and with great ease, with this tool. It is absolutely necessary, remember, that this hole bored in the cylinder should be at right angles to the ends of the same, and to secure this ...

"Sobre este título" puede pertenecer a otra edición de este libro.

(Ningún ejemplar disponible)


Crear una petición

Si conoce el autor y el título del libro pero no lo encuentra en IberLibro, nosotros podemos buscarlo por usted e informarle por e-mail en cuanto el libro esté disponible en nuestras páginas web.

Crear una petición