Artículos relacionados a Vector Mechanics for Engineers, Dynamics
Sinopsis
Book by Beer Ferdinand P Johnston Jr E Russell Clausen Wil
"Sinopsis" puede pertenecer a otra edición de este libro.
Reseña del editor
For the past forty years Beer and Johnston have been the uncontested leaders in the teaching of undergraduate engineering mechanics. Over the years their textbooks have introduced significant theoretical and pedagogical innovations in statics, dynamics, and mechanics of materials education. At the same time, their careful presentation of content, unmatched levels of accuracy, and attention to detail have made their texts the standard for excellence. The new Seventh Edition of Vector Mechanics for Engineers: Dynamics continues this tradition.
Biografía del autor
Born in France and educated in France and Switzerland, Ferdinand Beer held an M.S. degree from the Sorbonne and an Sc.D. degree in theoretical mechanics from the University of Geneva. He came to the United States after serving in the French army during the early part of World War II and taught for four years at Williams College in the Williams-MIT joint arts and engineering program. Following his service at Williams College, Beer joined the faculty of Lehigh University, where he taught for thirty-seven years. He held several positions, including the University Distinguished Professors Chair and Chairman of the Mechanical Engineering and Mechanics Department. In 1995, Beer was awarded an honorary Doctor of Engineering degree by Lehigh University.
Born in Philadelphia, Russ holds a B.S. degree in civil engineering from the University of Delaware and an Sc.D. degree in the field of structural engineering from The Massachusetts Institute of Technology (MIT). He taught at Lehigh University and Worchester Polytechnic Institute (WPI) before joining the faculty of the University of Connecticut where he held the position of Chairman of the Civil Engineering Department and taught for twenty-six years. In 1991 Russ received the Outstanding Civil Engineer Award from the Connecticut Section of the American Society of Civil Engineers.
Bill holds a B.S. degree in engineering mechanics from Lehigh University and M.S. and Ph.D. degrees in engineering mechanics from the Ohio State University. Bill is a registered professional engineer specializing in structural dynamics and vibration measurements. He taught for thirty years and served as vice chairman in the Department of Engineering Mechanics at the Ohio State University and has also taught in the Department of Mechanical Engineering.
Staab is a Software Developer NOT AUTHOR with Brooks Breeden at OSU. They are Staab and Breeden Software, Inc.
"Sobre este título" puede pertenecer a otra edición de este libro.
- EditorialMcGraw-Hill Education
- Año de publicación2003
- ISBN 10 0072930799
- ISBN 13 9780072930795
- EncuadernaciónTapa dura
- IdiomaInglés
- Número de páginas768
Comprar nuevo
Ver este artículo
EUR 23,70
GRATIS gastos de envío en Estados Unidos de America
Destinos, gastos y plazos de envíoOtras ediciones populares con el mismo título
Resultados de la búsqueda para Vector Mechanics for Engineers, Dynamics
Imagen de archivo
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/Math, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Antiguo o usado
Tapa dura
Librería: SecondSale, Montgomery, IL, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: Good. Item in good condition. Textbooks may not include supplemental items i.e. CDs, access codes etc. Nº de ref. del artículo: 00082122618
Cantidad disponible: 1 disponibles
Imagen de archivo
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/Math, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Antiguo o usado
Tapa dura
Librería: ThriftBooks-Dallas, Dallas, TX, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 3.7. Nº de ref. del artículo: G0072930799I4N00
Cantidad disponible: 1 disponibles
Imagen de archivo
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/Math, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Antiguo o usado
Tapa dura
Librería: ThriftBooks-Dallas, Dallas, TX, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 3.7. Nº de ref. del artículo: G0072930799I3N00
Cantidad disponible: 1 disponibles
Imagen de archivo
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/Math, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Antiguo o usado
Tapa dura
Librería: ThriftBooks-Reno, Reno, NV, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 3.7. Nº de ref. del artículo: G0072930799I3N00
Cantidad disponible: 1 disponibles
Imagen de archivo
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/Math, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Antiguo o usado
Tapa dura
Librería: ThriftBooks-Atlanta, AUSTELL, GA, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less 3.7. Nº de ref. del artículo: G0072930799I3N00
Cantidad disponible: 1 disponibles
Imagen de archivo
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Antiguo o usado
Tapa dura
Librería: Once Upon A Time Books, Siloam Springs, AR, Estados Unidos de America
Calificación del vendedor: 4 de 5 estrellas
hardcover. Condición: Good. This is a used book in good condition and may show some signs of use or wear . This is a used book in good condition and may show some signs of use or wear . Nº de ref. del artículo: mon0000723239
Cantidad disponible: 1 disponibles
Imagen de archivo
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Antiguo o usado
Tapa dura
Librería: HPB-Red, Dallas, TX, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority! Nº de ref. del artículo: S_300995127
Cantidad disponible: 1 disponibles
Imagen de archivo
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/Math, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Antiguo o usado
Tapa dura
Librería: Phatpocket Limited, Waltham Abbey, HERTS, Reino Unido
Calificación del vendedor: 5 de 5 estrellas
Condición: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions. Nº de ref. del artículo: Z1-EE-033-00052
Gastos de envío:
EUR 12,50
De Reino Unido a Estados Unidos de America
Destinos, gastos y plazos de envío
Cantidad disponible: 1 disponibles
Imagen del vendedor
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/Math, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Nuevo
Tapa dura
Librería: ZBK Books, Carlstadt, NJ, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Condición: new. Nº de ref. del artículo: ZWM.FO9B
Cantidad disponible: 1 disponibles
Imagen de archivo
Vector Mechanics for Engineers, Dynamics
Publicado por
McGraw-Hill Science/Engineering/Math, 2003
ISBN 10: 0072930799
ISBN 13: 9780072930795
Antiguo o usado
Tapa dura
Librería: Grumpys Fine Books, Tijeras, NM, Estados Unidos de America
Calificación del vendedor: 5 de 5 estrellas
Hardcover. Condición: very good. little wear and tear. Nº de ref. del artículo: Grumpy0072930799
Cantidad disponible: 1 disponibles